H3CA-8-AC200/220/240 Omron, H3CA-8-AC200/220/240 Datasheet - Page 10

• Manufacturer Part Number: H3CA-8-AC200/220/240
• Description: SOLID STATE TIMER
• Manufacturer: Omron
• Series: H3CAr

Specifications of H3CA-8-AC200/220/240

• Relay Type: Integrated
• Function: On-Delay
• Circuit: DPDT (2 Form C)
• Delay Time: 0.1 Sec ~ 9990 Hrs
• Output Type: Mechanical Relay
• Contact Rating @ Voltage: 3A @ 250VAC
• Voltage - Supply: 200 ~ 240VAC
• Mounting Type: Socket
• Termination Style: 8 Pin Socketable
• Timing Adjustment Method: Thumbwheel Switches
• Timing Initiate Method: Input Voltage
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: H3CA8AC200220240

Installation
■ Terminal Arrangement
■ Input Connections
Signal Inputs
Connect the start input contact between terminals C and F, the
reset input contact between terminals C and G, the gate input
contact between terminals C and E, and the check input contact
between terminals C and D.
For each signal input contact, use a gold-plated contacts with high
reliability. Be sure that these input signals satisfy the following
requirements: a resistance of 1 kΩ (max.) and a residual voltage of 1
V (max.) when the contact is made.
H3CA-A
Note: 1. *C: Check: 3-4
2. Conventional time-limit contacts are symbolized as
*G: Gate: 3-5
*S: Start: 3-6
*R: Reset: 3-7
However, the contacts of H3CA-A are symbolized as
because timer has 8 operation modes.
(+) or
(-)
* * * *
(+) or
(-)
(See
note
2)
H3CA-FA
.
Note: 1. *C: Check: X-E1
Solid-state Signal Inputs
Connect the start input transistor between terminals C and F, the
reset input transistor between terminals C and G, the gate input
transistor between terminals C and E, and the check input
transistor between terminals C and D.
For signal input, use an open collector type transistor with
characteristics: V
and I
satisfy the following requirements: a resistance of 1 kΩ (max.) and a
residual voltage of 1 V (max.) when the transistor is ON, and a
resistance of 200 kΩ (min.) when the transistor is OFF.
2. Conventional time-limit contacts are symbolized as
CBO
*G: Gate: X-D1
*S: Start: X-C1
*R: Reset: X-B1
However, the contacts of H3CA-FA are symbolized
as
= 0.5 µA max. In addition, be sure that the input signals
(+) or (-)
because timer has 8 operation modes.
CEO
* * * *
= 20 V min., V
CE(S)
= 1 V max., IC = 50 mA min.
(See
note
2)
H3CA
.
10