H11 POWER ACOUSTIK, H11 Datasheet - Page 5

• Manufacturer Part Number: H11
• Description: DWO SUPER WHITE XENON BULBS PA12V 55W H11
• Manufacturer: POWER ACOUSTIK

H15S2, H15S4 Connectors
This special connectors derive from the H15 connectors
having 7 standard contacts as above, combined with 2
(H15S2) or 4 (H15S4) high current contacts (jacks)
according to DIN 41626. These jacks are specially
designed to handle currents from 20 A up to 40 A. They
correspond to quality class 1, with respect to electrical and
mechanical life time. The contact material is high quality
Beryllium-Copper (CuBe treated) with gold-plated surface.
The high current jacks are joint separately to the
connectors. To install them, carefully follow the assembly
instructions. It is extremely important to solder cables,
screw cable terminals or heat shrink sleeves to high current
jacks first, before inserting them into the moulding.
Paralleled converters should preferably be interconnected
on current bars or at a star point.
Using screw versions, the two outer high current jacks may
Table 3: H15S2 and H15S4 Connector Survey
Delivery content: H15S2 (S4) moulding, two (four) high current jacks and assembly instructions. Screw versions also
include four M4 screws with washers and heat shrink sleeves.
Mechanical Dimensions (in mm)
SEP 29, 2003 revised to MAY 24, 2006
1
2
Fig. 10
STV-H15 S2-FSF/CO
11 faston terminals and two screw jacks.
STV-H15 S2-F/CO
11 faston terminals and two solder jacks (solder jacks are shown in fig. 13).
Female connector
type
STV-H15 S2-FSF/CO
STV-H15 S2-F/CO
STV-H15 S4-FSF/CO
STV-H15 S4-F/CO
STV-H15 S4-FLS/CO
STV-H15 S4-FSR/CO
Spare jacks are available on request: screw version YVM002, solder version XMB045.
Not for new designs. Use female connectors with faston terminals instead.
32
30
28
26
24
2
22
2
Reference
HZZ 00116
HZZ 00115
HZZ 00110
HZZ 00105
HZZ 00109
HZZ 00108
20
84.9
95
90
18
16
14
12
Cassette Style Mating Connectors H11, H15, H15S2, H15S4
Description of terminals
11 faston terminals 6.3
11 faston terminals 6.3
7 faston terminals 6.3
7 faston terminals 6.3
7 screw terminals 90°, 2.5 mm
7 screw terminals, 90°, 2.5 mm
8/10
4/6
×
×
×
×
Page 5 of 9
0.8 mm, 4 screw jacks
0.8 mm, 4 solder jacks
0.8 mm, 2 screw jacks
0.8 mm, 2 solder jacks
12054
be inserted at a 90° angle in order to prevent possible short
circuits between the cable terminals, especially in
applications with high vibration environment. Heat shrink
sleeves might be necessary for further isolation purposes
or to keep clearances and creepage distances at specified
levels.
An extraction tool allows removal of the high current jacks
for replacement (see fig. 15).
This connector type (male version) is used in the following
converter series (case size): PSK and PSS (K01), K (K02),
P (Q04) with output currents ≥20 A.
2
Caution: The use of an adequate cable strain relief device (e.g.
Cable Hood etc.) is essential, in order to protect the high current
contact jacks from damage. Never screw, solder or manipulate
these contacts when the connector is plugged into the male
connector! The use of highly flexible cables is strongly
recommended.
2
, torque ≤ 26.6 Ncm, 4 solder jacks
, torque ≤ 26.6 Ncm, 4 screw jacks
13
1
1
1
1
1
1
Accessories
www.power-one.com
Fig.
(10)
(12)
(13)
10
12
13
European
Projection
Integrated
coding
yes
yes
yes
yes
yes
yes