C200H-TC101 Omron, C200H-TC101 Datasheet - Page 29
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
C200H-TC101
Manufacturer Part Number
C200H-TC101
Description
RTD IN/RELAY OUT
Manufacturer
Omron
Datasheet
1.CS1W-PTS52.pdf
(39 pages)
Specifications of C200H-TC101
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
J System Configuration
J Features
•
•
•
•
•
•
•
•
•
•
•
Counter inputs
Encoder
Max. input frequency = 500 kHz (see note 1). Output
turns ON less than 0.5 ms after set value is reached
(see note 2).
32 bit counting range.
2 and 4 axis operation available.
5, 12, and 24 V line driver inputs available (5 and 12 V
line driver input is only available for 1 axis with the
CS1W--CT021 and 2 axes with the CS1W--CT041).
Supports simple, ring, and linear counting modes.
Supports offset phase input, up and down pulse input,
and pulse + direction input.
Supports 4 external control outputs and a total of 16
functions can be set including open gate, close gate,
preset, reset, capture, stop/capture/resetcombinations,
and reset enable.
One Module supports 4 external outputs and 28 inter-
nal outputs with counter value zone comparisons, tar-
get comparisons, delays, holds, programable outputs,
and hysteresis settings.
Pulse rate measurement function and data logging.
Counter outputs and external control inputs can be
used to trigger interrupt tasks in the CPU.
Settings can be changed during Module operation.
CS1W-CT041
CS1W-CT021
C200H-CT021
C200H-CT001-V1
C200H-CT002
The high--speed counter modules count pulse signal in-
puts that are too fast to be detected by normal input Mod-
ules. The Modules can be programmed to produce out-
puts accordding to counter values for specified condi-
tions, and many other funtions are supported.
Programmable Controller
High Speed Counter Modules
Special I/O Modules
CS1
C--101