TL-W3MB2 Omron, TL-W3MB2 Datasheet - Page 7

• Manufacturer Part Number: TL-W3MB2
• Description: NC PNP
• Manufacturer: Omron

Specifications of TL-W3MB2

• Rohs Compliant: YES
• Sensor Input: Inductive
• Sensing Range: 3mm
• Supply Voltage Range Dc: 12V To 24V

Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Do not use this product under ambient conditions that exceed the
ratings.
● Design
Influence of Surrounding Metal
When mounting the Sensor within a metal panel, ensure that the
clearances given in the following table are maintained. Failure to
maintain these distances may cause deterioration in the performance
of the Sensor.
Influence of Surrounding Metal
Applicable e-CON Connector Models and Manufacturers
The companies and model number of e-CON connections that can be used with Sensor cables are listed in the following table.
Confirm applicability when purchasing e-CON connectors for connection to Pre-wired Sensors.
Model
TL-W1R5MC1
TL-W3MC@
TL-W5MD@
TL-W5MC1
TL-W20ME@
TL-W5E@/-W5F@
TL-W1R5@/-W3@
(Not Exceeding the Height
Metal on a Single Side
of the Sensor Surface)
m
Sensing surface
Proximity
Sensor
Precautions for Correct Use
Model
Distance
WARNING
Metals on Both Sides and
25
2
3
5
0
l
(Unit: mm)
in Front of the Sensor
l
1-1473562-4 (red)
Sensing
surface
Proximity
Sensor
16
m
0
0
n
Tyco Electronics AMP K.K.
l
100
12
20
20
n
8
Mutual Interference
When installing Sensors face-to-face or side-by-side, ensure that the
minimum distances given in the following table are maintained.
Mutual Interference
Note: Values in parentheses apply to Sensors operating at different
● Mounting
● Adjustment
Turning ON the Power
An error pulse will occur (approximately 1 ms) if adjustments are
made when turning ON the power or making AND connections.
Model
TL-W1R5MC1
TL-W3MC@
TL-W5MD@
TL-W5MC1@
TL-W20ME@
TL-W5E@/-W5F@
• Use M3 flat-head screws to mount the TL-W1R5MC1 and TL-
• Do not exceed the torque in the following table when tightening the
TL-W1R5MC1
TL-W3MC@
TL-W5MD@
TL-W20M@
W3MC1.
resin cover screws.
frequencies.
Model
A
Distance
(Unit: mm)
0.98 N·m
Torque
1.5 N·m
200 (100)
120 (80)
75 (50)
90 (60)
50
A
B
200 (100)
30 (10)
60 (30)
25 (8)
TL-W
35
B
7