ST-PA2 RADIO DESIGN LABS, ST-PA2 Datasheet - Page 2
![no-image](/images/no-image-200.jpg)
ST-PA2
Manufacturer Part Number
ST-PA2
Description
RDL TWO-WATT UTILITY AMPLIFIER, NUMBER OF OUTPUTS: 2, FREQUENCY RESPONSE AT 600 OHM: 20 HZ-30 KHZ, FREQUENCY RESPONSE AT 8 OHM: 35 HZ-30 KHZ, THD: .5 %, INPUT: 10 KOHM, -15 DBV (LINE LEVEL), POWER REQUIREMENTS: 24-33 VDC, 150 MA, GRO
Manufacturer
RADIO DESIGN LABS
Datasheet
1.ST-PA2.pdf
(2 pages)
STICK-ON
Model ST-PA2
Utility Power Amplifier
TYPICAL PERFORMANCE
Input Configuration:
Input Level:
Frequency Response:
THD+N:
Noise:
Outputs (2):
Power:
891-0006J
®
SERIES
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Radio Design Labs Technical Support Centers
Unbalanced 10 kΩ
-15 dBV minimum (for rated power output)
-20 dBV minimum (for 1 watt RMS into 8 Ω)
35 Hz to 30 kHz (8 Ω +/- 1.5 dB)
20 Hz to 30 kHz (600 Ω +/- 0.5 dB)
< 0.75% (0.5 % typical)
< -80 dB (8 Ω @ 2 W RMS)
< -70 dB (600 Ω, referred to +4 dBu)
1 @ 8 Ω, 2 watts RMS maximum
1 @ 600 Ω, +12 dBu maximum
24 to 33 Vdc @ 150 mA, Ground-referenced
Installation/Operation
EN55103-1 E1-E5; EN55103-2 E1-E4
Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.