1241.3253 Schurter Inc, 1241.3253 Datasheet - Page 3

• Manufacturer Part Number: 1241.3253
• Description: PSE 22ANAE-RI00RT12-NO-Stecker
• Manufacturer: Schurter Inc
• Series: PSEr
• Type: Piezor

Specifications of 1241.3253

• Circuit: SPST-NO
• Switch Function: Off-Mom
• Contact Rating @ Voltage: 0.1A @ 42VAC/DC
• Actuator Type: Flush Round Button
• Illumination Type, Color: LED, Red
• Illumination Voltage (nominal): 12 VDC
• Mounting Type: Panel Mount
• Termination Style: Connector
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 22ANAE-RI00RT12-NO-A; 486-1557

SCHURTER GmbH
D – 79346 Endingen
www.schurter.com
1
The piezo switch is based on the functional principle of the piezoelectric crystal. The action of force
During the voltage drop, the electronic switch contact is closed for the specified pulse duration.
Diagram of an NO switch:
The piezo disk is connected to the terminals 1 and 2. The electric circuit to be switched is
In the neutral position of the piezo switching element, the terminals 3 and 4 are non-conductive,
When actuating the piezo disk, the resistance between terminals 3 and 4 is therefore changed from
This corresponds in principle to the function of a conventional NO pushbutton switch.
on the piezo disk causes a voltage to be induced due to a charge transfer. The voltage generated
is converted by the electronic connection into a polarity-neutral, electronic switch contact.
After this, the electronic switch contact opens again, even if the force is still present. The period
that the electronic switch contact remains closed depends on the actuating speed and force as well
as on the duration of actuation.
connected at the terminals 3 and 4. This can be either direct voltage (DC) or alternating voltage
(AC). If a pulse is applied to the piezo disk, terminal 1 becomes positive in relation to terminal 2 due
to the voltage generated. The integrated switching element controls the electric circuit to be
switched.
and initial contact resistance is greater than 10 MOhm. When the piezo disk is actuated, the initial
contact resistance is reduced to less than 20 Ohm.
high resistance
3 of 23
1.1
Page
PRODUCT DESCRIPTION
Functional Description: NO Switch
Date of issue
19.05.2008
low resistance
Author:
SHO
Changes that contribute to technical improvement are subject to alternations.
high resistance.
Date of change:
Changed by:
9738
Change No.
Datasheet No.
105.9524.200
Print date: 29/05/2008 08:44:00
Index
-