UCLAMP0501P.TCT Semtech, UCLAMP0501P.TCT Datasheet - Page 4

• Manufacturer Part Number: UCLAMP0501P.TCT
• Description: TVS DIODE, 200W, 5V, SLP1006P2
• Manufacturer: Semtech

Specifications of UCLAMP0501P.TCT

• Reverse Stand-off Voltage Vrwm: 5V
• Breakdown Voltage Range: 6V
• Clamping Voltage Vc Max: 12.5V
• Diode Configuration: Unidirectional
• Peak Pulse Current Ippm: 16A
• Diode Case Style: SLP1006P2
• No. Of Pins: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Device Connection Options
These TVS diodes are designed to protect one data,
I/O, or power supply line. The device is unidirectional
and may be used on lines where the signal polarity is
above ground. The cathode band should be placed
towards the line that is to be protected.
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
PROTECTION PRODUCTS
Applications Information
2007 Semtech Corp.
Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
Minimize the path length between the TVS and the
protected line.
Minimize all conductive loops including power and
ground loops.
The ESD transient return path to ground should be
kept as short as possible.
Never run critical signals near board edges.
Use ground planes whenever possible.
4
Pin 2
Circuit Diagram
Pin 1
uClamp0501P
www.semtech.com