SMD100F-2018-2 Tyco Electronics, SMD100F-2018-2 Datasheet - Page 28
![FUSE, PTC RESET, 15V, 1.1A, 2018](/photos/1/33/13390/smd_series_sml.jpg)
SMD100F-2018-2
Manufacturer Part Number
SMD100F-2018-2
Description
FUSE, PTC RESET, 15V, 1.1A, 2018
Manufacturer
Tyco Electronics
Series
MidSMDr
Type
Polyswitch Resettable Fusesr
Specifications of SMD100F-2018-2
Holding Current
1.1A
Tripping Current
2.2A
Initial Resistance Max
0.4ohm
Operating Voltage
15VDC
Ptc Fuse Case
2018
Initial Resistance Min
0.1ohm
R Min/max
0.100 ~ 0.400 Ohm
Voltage - Max
15V
Time To Trip
0.5s
Current - Hold (ih) (max)
1.1A
Current - Trip (it)
2.2A
Current - Max
40A
Package / Case
2018
Hold Current
1.1 Amps
Trip Current
2.2 Amps
Current Rating (max)
40 Amps
Resistance
0.4 Ohms
Maximum Voltage
15 Volts
Termination Style
Solder Pad
Mounting Style
SMD/SMT
Current Rating
40 Amps
Dimensions
5.44 mm L x 4.93 mm W x 1.52 mm H
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
RF0324-000
4
Part Numbering System
Solder Reflow and Rework Recommendations for Surface-mount Devices
Solder Reflow
• Recommended reflow methods:
• The following product series are
• The following product series are
• Recommended maximum paste
• Devices can be cleaned using
214
IR, Vapor phase, and hot air
oven.
not designed to be wave soldered
to circuit boards:
designed to be wave soldered
to circuit boards:
thickness for the microSMD,
miniSMDC, and miniSMDE
devices is 0.25 mm (10mils),
0.13-0.25 mm for miniSMDM
and nanoSMDM, and 0.38 mm
for SMD.
standard methods and solvents.
TS250
SMD
PolySwitch Surface-mount Resettable Devices
nanoSMDM
miniSMDM
midSMD
SMD
SMD2
TS
nanoSMDC
microSMD
miniSMDC, miniSMDE
150
-130
F
-RA
/33
-B-0.5
-RB
-2
-2
Rework
• Use standard industry practices
Caution:
• If reflow temperatures exceed the recommended profile, devices
2 = Tape and reel packaging
Rx - Resistance range (Limited part number availability)
Alternative voltage rating (If applicable)
Lead free
Hold current indicator
Product series
2 = Tape and reel packaging
Bxx = Resistance matched (Optional)
Rx - Resistance range (Optional)
Hold current (mA)
Product series
for the nanoSMDC,
nanoSMDM, microSMD,
miniSMDC, miniSMDM, and
miniSMDE devices.
may not meet the performance specifications.
300
250
200
100
150
50
0
Preheating
30 to 90
Figure S21
Soldering
10 to 20
Time(s)
• For SMD and midSMD series
and all TS devices rework
should be confined to removal
of the installed product and
replacement with a fresh
device.
Cooling
120
Raychem Circuit Protection