THD 10-2411 TRACOPOWER, THD 10-2411 Datasheet - Page 2
![CONVERTER, DC/DC, 10W, 5V/2A](/photos/21/62/216286/820627904-40_sml.jpg)
THD 10-2411
Manufacturer Part Number
THD 10-2411
Description
CONVERTER, DC/DC, 10W, 5V/2A
Manufacturer
TRACOPOWER
Datasheet
1.THD_10-2410.pdf
(3 pages)
Specifications of THD 10-2411
Output Type
Single
No. Of Output Channels
1
Input Voltage
18V To 36V
Power Rating
10W
Output Voltage
5.1V
Output Current
2A
Supply Voltage
24V
Dc / Dc Converter Case Style
DIP
Dc / Dc Converter O/p Type
Single
No. Of Outputs
1
Approval Bodies
CSA / CUL / EN / IEC / UL
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Input Specifications
Input current (no load)
Input current (full load)
Start-up voltage /
under voltage shut down
Surge voltage
(1 sec. max.)
Reverse voltage protection
Conducted noise (input)
Output Specifications
Voltage set accuracy
Regulation
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
Output current limitation
Short circuit protection
Capacitive load
General Specifications
Temperature ranges
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217 F)
Isolation voltage Input/Output
Isolation capacity Input/Output
Isolation resistance Input/Output (500 VDC)
Switching frequency (fixed)
Safety standards
Safety approvals
– Input variation Vin min. to Vin max.
– Load variation 10 – 100 %
– Operating
– Derating
– Case temperature
– Storage
24 Vin; other output models: 480 mA typ.
48 Vin; other output models: 240 mA typ.
48 Vin; 2.5.Vout models: 190 mA typ.
24 Vin; 2.5.Vout models: 380 mA typ.
12 VDC output models: 820 µF max.
single output models: 2’200 µF max.
24 Vin models:
48 Vin models:
24 Vin models: 18 VDC / 17 VDC
48 Vin models: 36 VDC / 34 VDC
24 Vin models:
48 Vin models: 100 V max.
0.5 A max.
EN 55022 level A, FCC part 15, level A
±1.2 %
± 1.0 % max.
± 1.2 % max. (± 1.5% max. for 2.5 Vout models)
85 mVpk-pk max.
± 0.02 % /K
>110% of Iout max., constant current
indefinite (automatic recovery)
–40 °C ... +85 °C
3%/K above 70°C
+100 °C max.
–55 °C ... +125 °C
95 % rel H max.
>1 Mio. h @ + 25 °C
1‘500 VDC
1’200 pF typ
> 1‘000 M Ohm
400 kHz typ. (Pulse width modulation PWM)
UL/cUL60950, EN 60950, IEC 60950
compliance up to 60 VDC input voltage
(SELV limit)
UL/cUL 60950
20 mA typ.
10 mA typ.
50 V max.
DC/DC Converters
THD 10 Series
Page 2 of 3
10 Watt