TMR 0512 TRACOPOWER, TMR 0512 Datasheet - Page 2

• Manufacturer Part Number: TMR 0512
• Description: DC/DC CONVERTER, 2W, 12V
• Manufacturer: TRACOPOWER

Specifications of TMR 0512

• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 1
• Input Voltage: 4.5V To 9V
• Power Rating: 2W
• Output Voltage: 12V
• Output Current: 165mA
• Approval Bodies: UL, CUL
• Supply Voltage: 5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Input Specifications
Input current at full load (nominal input)
Surge voltage (100 msec. max.)
Input voltage variation (dv/dt)
Input Filter
Start up time
Output Specifications
Voltage set accuracy
Regulation
Minimum load
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
Short circuit protection
Capacitive load
General Specifications
Temperature ranges
Derating (convection cooling)
Humidity (non condensing)
Reliability, calculated MTTF (MIL-HDBK-217F, @ +25°C, ground benign)
Isolation voltage (60 sec)
Isolation capacity
Isolation resistance
Switching frequency
Remote On/Off
Safety approvals
Application notes can be downloaded under:
www.tracopower.com/products/tmr2_application.pdf
– Input variation Vin min. to Vin max.
– Load variation 10–100 %
– Operating
– Storage
– Input/Output
– Input/Output
– Input/Output (500 VDC)
– On:
– Off:
– Off stand by input current
– UL/cUL
±12 VDC / ±15 VDC output models: 100 µF max. / ±47 µF max.
dual output models balanced load: 1.0 % max.
12 VDC / ±5 VDC output models: 170 µF max. / ±470 µF max.
dual output models asymetric load: 5.0 % max. (25% / 100%)
3.3 VDC / 5 VDC output models: 2’200 µF max. / 1’000 µF max.
single output models: 0.75 % max.
3.3 VDC models: 0.85 % max.
48 Vin models: 62 mA max.
48 Vin models: 100 V max.
24 Vin models: 117 mA max.
24 Vin models: 50 V max.
12 Vin models: 242 mA max.
12 Vin models: 25 V max.
5 Vin models: 645 mA max.
5 Vin models: 15 V max.
5 V/ms, max.
(complies to ETS 300 132 part. 4.4)
capacitor type
1 ms typ. (at nominal input and resistive load)
±1 %
0.5 % max.
10 % of rated max current (operation at lower
load condition is safe but a higher output ripple
will be experianced)
50 mVpk-pk max.
±0.1 %/°C
continuous, automatic recovery
–40°C to +85°C (with derating)
–55°C to +100°C
2 %/K above 75°C
95 % rel. H max.
>2.3 Mio h
1’000 VDC
300 pF max.
>1‘000 MOhm
100 to 650 kHz (PFM)
open or high impedance
4...8 mA input current applied via 1KW resistor
max. 1mA
www.ul.com
DC/DC Converters
TMR 2 Series
-> certifications -> File E188913
Page 2 of 3
2 Watt