72-1098 TENMA, 72-1098 Datasheet - Page 6

• Manufacturer Part Number: 72-1098
• Description: POWER SUPPLY, BENCH, 145V
• Manufacturer: TENMA

Specifications of 72-1098

• Power Supply Output Type: Variable
• No. Of Outputs: 2
• Output Voltage: 145V
• Output Voltage 2: 145V
• Output Current: 7A
• Input Voltage: 110V AC To 127V AC
• Length: 260.35mm
• Width: 301.625mm
• Height: 155.575mm

OPERATION
PROCEEDURE
Ensure that the Isolated Variable Power Supply is connected to the proper 120VAC, 60Hz power
source. The wall outlet MUST be a three-wire grounded type, with a good earth ground.
Turn off the AC power supply and set the OUTPUT VOLTAGE control to the minimum position
(fully counterclockwise).
Connect any additional equipment to be used, directly to the AC power source. Do not power via
the isolated output of this supply.
Connect the AC power cord, of the unit under test, to the output receptacle on the front of this
supply.
Turn the supply power on.
Turn on the power to the device under test.
Adjust the output voltage of the Isolated Variable Power Supply to the desired level.
For questions regarding problems or use of this unit, please contact our Technical Support
Department at 1-800-765-6960, or email at [e-mail].
6