N6774A AGILENT TECHNOLOGIES, N6774A Datasheet - Page 3

• Manufacturer Part Number: N6774A
• Description: POWER MODULE, BASIC, DC, 35V, 300W
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of N6774A

• Power Supply Output Type: Fixed
• No. Of Outputs: 4
• Output Voltage: 35V
• Output Current: 8.5A
• Power Rating: 300W
• Input Voltage: 100V AC To 240V AC
• Approval Bodies: CE
• Output Type: Fixed
• Calibrated: No
• Lead Free Status / RoHS Status: na

Protection features
Each N6700 module is protected
against over-voltage, over-current,
and over-temperature. A fault
condition in one module can be
detected within 10 microseconds
by other modules so that they can
be quickly shut down to avoid
hazardous conditions on your
device under test (DUT).
Connectivity
The N6700 MPS comes standard
with GPIB, USB 2.0, and 10/100
Base-T Ethernet LAN interfaces.
While GPIB is best suited for use
with existing systems, Agilent
offers USB and LAN to allow you to
take advantage of the availability,
speed, and ease-of-use of common
computer industry standard inter-
faces. The N6700 is fully compliant
with the LXI Class C specification.
Security
When used in systems running
GPIB, the LAN and/or USB inter-
faces can be disabled for extra
security. Also, all non-volatile RAM
data and settings can be cleared
from the front panel.
Figure 2. Output sequencing
Control from any browser
The N6700 can be controlled via a
standard web browser. The N6700
contains a web server that provides
web pages for monitor, control, and
setup of the MPS.
Output sequencing
Each DC power module can be indi-
vidually set to turn on or to turn off
with a delay. By adjusting the delay
times and then commanding the
N6700 to turn on, you can set the
N6700 modules to sequence on in a
particular order. The same sequenc-
ing capability is available to shut
down the modules in a particular
order.
Module 1
Module 2
Module 3
Output on
3
3
Delay 2
Delay 3
For applications that require more
than four DC power modules to be
sequenced, this output sequencing
can be extended across multiple
N6700 mainframes. By wiring together
the I/O ports on the rear panel of
the mainframes, a pair of synchro-
nization signals are sent between
mainframes, allowing the output
sequences of each mainframe to
be synchronized. This capability is
supported on N6700B, N6701A and
N6702A mainframes. It is not sup-
ported on N6700A mainframes.
V1
V2
V3