N6751A AGILENT TECHNOLOGIES, N6751A Datasheet - Page 3

• Manufacturer Part Number: N6751A
• Description: POWER SUPPLY, BENCH, 50V, 50W
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of N6751A

• Power Supply Output Type: Variable
• No. Of Outputs: 1
• Output Voltage: 50V
• Output Current: 5A
• Power Rating: 50W
• Input Voltage: 100V AC To 240 V AC
• Length: 596.9mm
• Width: 432.5mm
• Height: 44.45mm
• Lead Free Status / RoHS Status: na

Some features that were options
on the 662xA are now standard
on the N6700A/B.
right provides a list of options
for the 662xA and how they
correspond to the N6700A/B.
Some options are only partially
replaced, meaning some, but not
all, of the features provided in
the 662xA options are provided
in the standard N6700A/B. In
the table, multiple features
within one option are separated
by a dotted line.
Options 100, 120, 220, and 240
The N6700A/B comes standard
with a universal input that has
a range of 100-240 VAC nominal
and 47-63 Hz. For this reason
the N6700A/B has no input volt-
age options. This input range
covers all the ranges available
on the 662xA. Line voltage
conversion and fuse changes
are no longer necessary.
Option and Accessory
Selection
Table 2
at
3
4
662xA
Option/Accessory
Voltage Options
100
120
220
240
750
S50
(Similar to
Option 750)
908
909
Part Number
1494-0059
E3663AC
Table 2. Option Selection Guide
See below for further explanation.
See Rack Mounting in the Mechanical section.
3
Description
87 to 106 Vac, 47 to 66 Hz
104 to 127 Vac, 47 to 63 Hz None
191 to 233 Vac, 47 to 66 Hz None
209 to 250 Vac, 47 to 66 Hz None
External Relay Control
RI/DFI, RI latches
External Relay Control
RI/DFI, RI does not latch
Rack-mount Kit
w/o Handles
(p/n 5062-3977)
Rack-mount Kit
w/Handles
(p/n 5062-3983
or 5063-9221)
Rack Slide Kit
Support rails for
Agilent rack cabinets
N6700A/B Description
Option
None
None
Standard
None
Standard
908
908
908
908
100 to 240 Vac nominal, 47 to 63 Hz
Universal Input
Standard on N6700A/B
Not implemented in N6700A/B.
Use “OUTPut:INHibit:MODE
LATChing” command for latching RI.
This is the default mode.
Not implemented in N6700A/B.
Use “OUTPut:INHibit:MODE LIVE”
command for non-latching RI.
Rack Mount Kit
(p/n N6700-60009)
Handles are standard
Rack Mount Kit
(p/n N6700-60009)
Handles are standard
Slide Kit must not be used due to
airflow and height restrictions.
Rails must not be used due
to airflow and height restrictions.
4
4
3
3
4
3
3
4