N6742B AGILENT TECHNOLOGIES, N6742B Datasheet - Page 6

• Manufacturer Part Number: N6742B
• Description: POWER SUPPLY, BENCH, 8V, 100W
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of N6742B

• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 8V
• Output Current: 12.5A
• Power Rating: 100W
• Input Voltage: 86V AC To 264V AC
• Approval Bodies: CE
• Output Type: Fixed
• Calibrated: No
• Mounting Type: Rack Mount
• Rohs Compliant: NA
• External Depth: 585.6mm
• Lead Free Status / RoHS Status: na

Front panel
In addition to full control over its
three standard interfaces, the N6700
has a full featured front panel to
permit easy manual operation for
test prototyping, debugging, and
troubleshooting when used in an
ATE system. You can have confi-
dence that the N6700 is working
properly because you can view the
settings and actual output values on
all four outputs at the same time.
Quieter fans to keep noise down
To reduce acoustic noise, the
N6700 mainframes employ fan
speed control. When operating at
less than full output power, the
cooling fans spin slower and
generate less noise.
Figure 3. Front panel with up to 4 channels displayed simultaneously (Picture shows 3 channels installed.)
Figure 4. Rear panel (Picture shows 3 channels installed.)
Universal AC input
The N6700 has a universal input
that operates from 100-240 Vac,
50/60/400 Hz. There are no switch-
es to set or fuses to change when
switching from one voltage standard
to another. The AC input employs
power factor correction.
Quick disconnects
Each power module has quick
disconnects for easy system setup
and maintenance.
Figure 5. Quick disconnects for power and sense leads
6
Rack mount kit
The N6700 is easily rack-mounted
using available option 908.
This kit provides all the necessary
hardware to rack mount one N6700
mainframe in only 1U of rack space.
This rack mount kit includes front
rack ears and rear supports which
take the place of standard rack rails
and/or slides. Note that standard
rack rails or slides are not needed
and are not compatible with the
N6700 because of its 1U size and
airflow requirements.