E3612A AGILENT TECHNOLOGIES, E3612A Datasheet - Page 2

• Manufacturer Part Number: E3612A
• Description: PSU, DC, BENCH, 60V/120V, 30W
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of E3612A

• Power Supply Output Type: Variable
• No. Of Outputs: 2
• Output Voltage: 60V
• Output Voltage 2: 120V
• Output Current: 500mA
• Output Current 2: 250mA
• Power Rating: 30W
• Load Regulation: 0.01%
• Length: 318.4mm
• Lead Free Status / RoHS Status: na

Reliable Power,
Repeatable Results
Affordable, full-featured
benchtop power supplies
provide excellent
performance and flexibility
A whole family of low-cost
power supplies to meet your
needs
The E3600 Series of low-cost
benchtop power supplies give you
the performance of system power
supplies at a decent price. All E3600
family members provide clean power
with excellent regulation and a fast
transient response. The E3600 Series
single-output non-programmable
models are described on this page.
Refer to page 3 for information on
dual-output and triple-output non-
programmable models.
Single-output models
All E3600 Series single-output
non-programmable power supplies
feature separate digital-panel
meters for monitoring voltage and
current simultaneously, giving
you precise reading and control
capability. All models also feature
10-turn potentiometers for accurate
adjustment of voltage and current
output settings.
With 0.01 percent load and line
regulation, these instruments keep the
output steady when power line and
load changes occur.
control
regulation
Linear power supply
Single, dual or triple output
10-turn voltage and current
Low noise and excellent
The low normal mode noise
specification of less than 200 μVrms
ensures clean power for precision
circuitry.
In all single-output models, either
the positive or negative terminal can
be connected to ground, providing a
positive or negative voltage output.
Outputs can also be floated up to
240 V from ground.
These instruments also feature
adjustable current limits, letting you
set the safest current limit without
having to short the output.
E3610A, E3611A, and E3612A
single-output, dual range
models
These popular 30-watt bench
supplies are designed for general
laboratory use. The constant-voltage,
constant-current output allows
operation as either a voltage or current
source. The changeover occurs
automatically, based on the load.
Each of these models has two ranges,
allowing more current at a lower
voltage. For higher output voltages,
supplies can be connected in series.
These models also feature overload
protection. A continuously acting
constant current circuit protects the
power supply against all overloads
including a direct short placed across
the terminals in a constant voltage
operation.
2
E3614A, E3615A, E3616A and
E3617A models feature
overvoltage protection, remote
sensing and remote
programming
These flexible 60-watt, single-range
power supplies can be used as either
voltage or current sources. When the
output terminal voltage increases to a
preset shut-down level, an overvoltage
protection circuit disables the output
to protect the device under test
(DUT) for damage. The overvoltage
protection feature can be easily
monitored and adjusted from the front
panel.
Using the remote sensing capability,
these instruments automatically
compensate for voltage drop in the
load leads, so you obtain an accurate
voltage at the DUT.
Using the remote analog voltage
programming capability, these
instruments can remotely vary the
voltage, so you are able to control the
regulation output voltage or current.
You can combine multiple units in
auto-parallel, auto-series and auto-
tracking configurations for greater
output voltage or current capacity.
Front and rear output terminals allow
for a flexible configuration. The output
voltage and current can be controlled
with external 0% to 10% volt analog
voltage or variable resistance.