AW6S Amphenol Sine Systems Corp, AW6S Datasheet - Page 4

• Manufacturer Part Number: AW6S
• Description: CONN PLUG WEDGE 6POS GREEN
• Manufacturer: Amphenol Sine Systems Corp
• Series: AT Series™r

Specifications of AW6S

• Accessory Type: Wedge for Sockets
• Number Of Positions: 6
• For Use With: 889-1033 - CONN PLUG 6POS 14-20AWG SIZE 16889-1015 - CONN PLUG 6POS 14-20AWG SIZE 16
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: AT Series™
• Features: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 889-1043

AT Series™ Specifications
The connector design incorporates an integral latching system that ensures a definitive electrical and mechanical connection.
connector housings are manufactured with a thermoplastic material that is not only durable, but has excellent UV resistance, dielectric/
mechanical properties and environmentally RoHs compliant.
the sealing system is comprised of a front and rear silicone, multi-sealing, perimeter against environmental ingress.
contacts are derived from quality copper alloy to ensure an electrically-reliable connection. For applications demanding higher levels
of performance, you can rely on our Rocksolid™ contact technology.
performance criteria
cURReNt capacItY
WIRe RaNGe
tempeRatURe
dIelectRIc ValUe
Flame ResIstaNce
dROp test
VIbRatION
cONNectOR teRmINal
ReteNtION
cONNectOR ReteNtION
tHeRmal sHOcK
INsUlatION ResIstaNce
matING cYcle dURabIlItY
cONtact mIllIVOlt dROp
UltRaVIOlet eFFects
WateR ImmeRsION
product material
HOUsINGs
seals
secONdaRY lOcKs
cONtacts

sHOcK
No. 6, 3 amps (max)
No 6 contacts will accept wire ranges of 4 thru 0 awg
Operating temperature range: -55°c to +5°c at rated current
meets or exceeds 500 volts minimum
All dielectric materials have a flammability rating of UL94 HB or better
shall not become detached or loosened when placed at 750mm and dropped to concrete eight times
No latch disengagement or discontinuity shall be the result when subjected to 50 g’s in each of three
axis (X, Y & z)
continued continuity without degradation to mechanical or physical attributes following vibration.
(max acceleration 0 g’s at sine sweep of 0-000Hz)
When subjected to a direct pull, size 4-0 achieves minimum pull-out force of 0 newtons
a mated connector subjected to a pulling force by the exiting wire bundle at  newtons times the
number of contacts to a maximum of 444 newtons applying load for 30 seconds
subjected to 0 cycles at -55°c to +5°c with no cracking, chipping or other damage detrimental to
the normal operation of the connector
Insulation resistance at 5°c shall be greater than 0 megohms when 000 Vdc are applied
Following 00 cycles of connection engagement and disengagement, degradation either mechanical
or electrical is not evident
No. 6 contacts with 6 awg conductor - *00 millivolt drop max at 3 amps test current
test the mated connectors for 000 hours per astm G 54 or astm G 53 with 0 hours UV and 4 hours
of condensation for each cycle
a mated connection, properly wired, placed in an oven at +5°c for  hour, then placed immediately
in a depth of water of  meter for 4 hours without loss of electronic performance
thermoplastic
silicone elastomer
thermoplastic
copper alloy, Nickel plated, Gold optional