MCR-C-UI-UI-DCI-NC Phoenix Contact, MCR-C-UI-UI-DCI-NC Datasheet - Page 5

• Manufacturer Part Number: MCR-C-UI-UI-DCI-NC
• Description: INTERFACE ANALOG
• Manufacturer: Phoenix Contact

Specifications of MCR-C-UI-UI-DCI-NC

• Input Type: Configurable
• Output Type: Configurable
• No. Of Output Channels: 1
• Accuracy: ± 0.1%
• Supply Voltage Range: 18VDC To 30VDC
• Approval Bodies: CE, GL, UL Recognised
• External Depth: 114.5mm
• External Length /: RoHS Compliant
• External Length / Height: 99mm
• Rohs Compliant: Yes
• Signal Conditioner Input: 0V To 10V
• Signal Conditioner Output: 0V To 10V

MCR-C-UI-UI(-450)-DCI(-NC)
Safety notes
WARNING: Correct usage in potentially explosive areas
The module is a category 3 item of electrical equipment. Follow the instructions provided here during instal-
lation.
Install the module in housing with IP54 protection according to EN 60529. The specified limits for mechanical
strain or thermal loads for the module must not be exceeded.
Only modules suitable for operation in zone 2 potentially explosive areas may be connected.
Repairs must not be carried out by the user.
In potentially explosive areas, snap the module onto the DIN rail and connect the cables only when the power
is disconnected.
CAUTION
Installation, operation, and maintenance may only be carried out by qualified electricians. When installing and
operating the device, the applicable safety directives (including national directives), accident prevention re-
gulations, as well as general technical regulations, must be observed.
CAUTION: Electrostatic discharge
The module contains components that can be damaged or destroyed by electrostatic discharge. When hand-
ling the module, observe the necessary safety precautions against electrostatic discharge (ESD) according
to EN 61340-5-1 and EN 61340-5-2.
5
100238_en_02
PHOENIX CONTACT