SNAP-PAC-S1-W OPTO 22, SNAP-PAC-S1-W Datasheet - Page 8
![no-image](/images/manufacturer_photos/0/4/498/opto_22_sml.jpg)
SNAP-PAC-S1-W
Manufacturer Part Number
SNAP-PAC-S1-W
Description
Programmable Controller Wireless
Manufacturer
OPTO 22
Specifications of SNAP-PAC-S1-W
Accessory Type
Programmable Automation Communication
Signal Input Type
Ethernet, RS-232
Rohs Compliant
Yes
For Use With
SNAP PAC System
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
PAGE
8
System Architecture (continued)
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2006–2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
The Wired+Wireless SNAP PAC S-series controller is
controlling three groups of I/O units: one group through
its serial port, another through a standard 10/100 Mbps
interface, and the third over a wireless LAN.
Wired+Wireless SNAP PAC S-series Controller
The Wired+Wireless PAC can communicate with devices on wired networks, on a wireless LAN, or on both
at once. It can also simultaneously communicate serially.
PC running PAC Display
SNAP-PAC-S1-W controller
controls all I/O units.
Serial I/O units
Ethernet switch
Ethernet switch
PC running PAC Control
Wireless
access point
SNAP PAC S-Series Controllers
At the same time, the controller is connected to a
second wired network for communication with PCs
running PAC Control and PAC Display.
I/O units on a wired
Ethernet network
Wired+Wireless I/O units