SNAP-AIV OPTO 22, SNAP-AIV Datasheet - Page 3

• Manufacturer Part Number: SNAP-AIV
• Description: I/O Module
• Manufacturer: OPTO 22
• Type: Inputr

Specifications of SNAP-AIV

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Supply Voltage Min: -10VDC
• Signal Input Type: -10 To 10VDC
• Supply Voltage Max: 10VDC
• Resolution: 0.4mV
• No. Of Analog Inputs: 2
• Brand/series: SNAP Series
• Connection To Host: Backplane
• Current, Input: 170 mA
• Dimensions: 82.55mmL×18.29mmW×90.17mmH
• Input: -10 to +10/-5 to +5 VDC
• Input Type: Analog
• Input, Range: -10 to +10/-5 to +5 VDC
• Mounting Type: PCB
• Number Of Channels: 2
• Number Of Inputs: 2 Channels
• Primary Type: Control
• Resistance, Input: 1 Megohms
• Special Features: Transformer Isolation, Optical Isolation
• Standards: UL, CSA, CE Certified
• Temperature, Operating: 0 to +70 °C
• Time, Response: 10 ms
• Voltage, Isolation: 1500 V
• Voltage, Supply: 5 VDC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Installation
Note module and processor compatibility in the following
table:
All modules can be used with SNAP PAC rac ks and can be
placed in any position on the rack. Two- and four-channel
modules (except the SNAP-AIRTD-10) can also be used with
legacy SNAP M-series and B-series mounting racks. (For more
information on using legacy hardware, see form #1688, the
SNAP PAC System Migration Technical Note.)
Modules snap securely into place in the row of connectors on
the mounting rack. Each module connector has a number.
Analog input modules and other types of SNAP I/O modules
are mounted on the module connectors starting at module
position zero.
Modules require a special tool (provided) for removal.
32-channel inputs
8-channel inputs
SNAP-AIRTD-10
4-channel inputs
2-channel inputs
(except SNAP-
AIRTD-10)
SNAP Analog Input Modules
© 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Modules
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
SNAP PAC R-series controllers and
SNAP PAC brains, including Wired+Wire-
less models
SNAP PAC R-series controllers and
SNAP PAC brains, including Wired+Wire-
less models
Also the following legacy brains:
SNAP Ethernet, SNAP Simple, SNAP
Ultimate; SNAP-DNP-ASDS; SNAP OEM
SNAP PAC R-series controllers and
SNAP PAC brains, including Wired+Wire-
less models
Also the following legacy brains:
SNAP Ethernet, SNAP Simple, SNAP
Ultimate; SNAP-DNP-ASDS; SNAP OEM;
serial SNAP brains (B3000, Modbus, Pro-
fibus); B3000-HA; B6
Compatible I/O Processors
The following diagram shows part of a SNAP PAC mounting
rack.
1.
2.
3.
4.
5.
For faster, easier field wiring installation and maintenance,
use SNAP TEX cables and breakout boards. See Opto 22 form
#1756, the SNAP TEX Cables & Breakout Boards Data Sheet, for
compatibility and specifications.
Place the rack so that the module connector numbers
are right-side up, with zero on the left, as shown in the
diagram above. (If your rack has screw connectors, the
screw connectors will be at the bottom.)
Position the module over the module connector,
aligning the small slot at the base of the module with
the retention bar on the rack. When positioning modules
next to each other, be sure to align the male and female
module keys at the tops of the modules before snapping
a module into position.
With the module correctly aligned, push on the module
to snap it into place.
(Optional) Use standard 4-40 x 1/4 truss-head Phillips
hold-down screws to secure both sides of each module.
CAUTION: Do not over-tighten screws.
Follow the wiring diagrams beginning on
attach modules to the devices they monitor. Most
modules accept up to 14 AWG wire; the SNAP-AITM-8
accepts a maximum of two solid 18 AWG wires.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
Processor
connector
Module
position zero
Module connectors
page 4
Retention bar
to
PAGE
3