H3DS-AL Omron, H3DS-AL Datasheet - Page 3

• Manufacturer Part Number: H3DS-AL
• Description: Multifunction Timer
• Manufacturer: Omron

Specifications of H3DS-AL

• Time Range: 0.1 To 1.2 Sec, 10 - 120 Hr
• Supply Voltage Ac, Min: 24VAC
• Supply Voltage Dc, Max: 48VDC
• Supply Voltage Dc, Min: 24VDC
• Length/height, External: 80mm
• Supply Voltage Ac, Max: 230VAC
• External Width: 17.5mm
• External Depth: 73mm
• Operating Temperature Max: 55°C
• Operating Temperature Min: -10°C

H3DS
Note: 1. DC ripple rate: 20% max.
6
Rated supply voltage
Operating voltage range
Power reset
Reset voltage
Power
consumption
(
(see note 3)
Voltage input
Control output
Ambient temperature
Ambient humidity
(see notes 1 and 2)
Ratings
2. Since an inrush current of 0.4 A will occur when using the power supply voltage at 24 VDC, pay careful attention when turning on or
3. The power consumption is for mode A after the Timer counts the time-up time and for the AC input at 50 Hz. The power consumption
t 3)
p
off the power supply to the Timer with a solid-state output such as a sensor.
of the H3DS-ML includes the input circuit with the B1 and A1 terminals short-circuited.
H3DS-MLj
H3DS-SLj
H3DS-ALj
24 to 230 VAC (50/60 Hz)/24 to 48 VDC
85% to 110% of rated supply voltage
Minimum power-off time: 0.1 s
2.4 VAC/DC max.
AC: approx. 26.9 VA (1.8 W) at 230 VAC
DC: approx. 0.6 W at 24 VDC
AC: approx. 26.5 VA (1.8 W) at 230 VAC
DC: approx. 0.6 W at 24 VDC
AC: approx. 27.1 VA (1.8 W) at 230 VAC
DC: approx. 0.6 W at 24 VDC
Max. permissible capacitance between inputs lines (terminals B1 and A2): 2,000 pF
Load connectable in parallel with inputs (terminals B1 and A1).
H-level:
L-level:
Contact output: 5 A at 250 VAC with resistive load (cos = 1)
Operating:–10 C to 55 C (with no icing)
Storage: –25 C to 65 C (with no icing)
Operating: 35% to 85%
20.4 to 253 VAC/20.4 to 52.8 VDC
0 to 2.4 VAC/DC
5 A at 30 VDC with resistive load (cos = 1)
H3DS