DS6-34DSX068N0-N EATON CUTLER HAMMER, DS6-34DSX068N0-N Datasheet - Page 5
![Motor Starter](/photos/21/35/213527/4673671_sml.jpg)
DS6-34DSX068N0-N
Manufacturer Part Number
DS6-34DSX068N0-N
Description
Motor Starter
Manufacturer
EATON CUTLER HAMMER
Datasheet
1.DS6-34DSX041N0-N.pdf
(8 pages)
Specifications of DS6-34DSX068N0-N
Supply Voltage Range
24 VDC
No. Of Phases
Three
Power Rating
37kW
Current Rating
68A
Operating Temperature Range
0°C To +40°C
Horsepower, 3-phase
50hp
Features
Soft Start
Horsepower, 1-phase
20hp
DS6 series soft start controllers
24 Vdc power supply requirements
The 24 Vdc power supply for your DS6 soft start controller must
meet or exceed the following requirements:
•
•
•
•
Operations
•
•
•
•
N
It is important to correctly set the ramp time, so the bypass contactors will
close within 5 seconds after the motor has achieved rated RPM.
•
•
ote:
Minimum steady-state current: 1W (35 mA)
Minimum start command current: 2W (65 mA)
Minimum bypass contactor inrush current: 600 mA for 50 ms
Voltage stability: 24 Vdc +10%/–15%
24 Vdc control voltage is applied to terminal +24
The status light will illuminate after the starter has completed
initialization, closing contacts 23/24, and indicating READY status
Line voltage is applied to the starter by closing the
mains contactor
The soft start controller issues a START command by applying
+24 Vdc to terminals EN and +A1. Contacts 13 and 14 will close
when the end of the ramp time is reached
To initiate a STOP command, remove +24 Vdc from terminal EN
and +A1 or EN
To initiate a RAMP STOP command, remove +24 Vdc from
terminal +A1
Bypass contactors close at the end of ramp time + ~0.18 seconds.
Adjusting the soft start controller parameters
There are three adjustments to the DS6 soft start controller:
•
•
•
N
START command is sent to the soft start controller.
Figure 6. DS6 Ramp Functions
ote:
u-Start
t-Start = ramp time
u-Start = initial voltage (torque)
t-Stop = stop ramp time
In all cases, motor rotation should begin within 2–3 seconds after the
U
EATON CORPORATION www.eaton.com
t-Start
Instructional Leafl et IL03901001E
(Top of Ramp)
13 14
t-Stop = 0
TOR
t-Stop
Effective June 2009
t
5