ATV12HU40M3 SQUARE D, ATV12HU40M3 Datasheet - Page 11

• Manufacturer Part Number: ATV12HU40M3
• Description: AC Drive
• Manufacturer: SQUARE D

Specifications of ATV12HU40M3

• No. Of Phases: Three
• Power Rating: 3.7kW
• Output Voltage Max: 230V
• Output Current: 16.7A
• Supply Voltage Max: 230V
• Frequency Range: 0.5 To 400Hz
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Introduction
Drive with heatsink
ATV12H075M2
ATV12H075M2 with door on
front panel open
Multi-Loader
configuration tool
Remote terminal
with cover closed
Specifications:
page 10
5
6
4
(continued)
1
2
3
Drive on base plate
ATV12P075M2
Remote terminal with cover
open: RUN, FWD/REV and
STOP buttons accessible
References:
page 14
Altivar
variable speed drives
The Altivar
power ratings from 0.18 kW to 4 kW on three types of power supply: Two standard
versions are available:
Drive with heatsink for normal environments and fan-cooled enclosure:
v 100 to 120 V single-phase, 0.18 kW to 0.75 kW (ATV12HpppF1)
v 200 to 240 V single-phase, 0.18 kW to 2.2 kW (ATV12HpppM2)
v 200 to 240 V three-phase, 0.18 kW to 4 kW (ATV12HpppM3)
Drive on a base plate for mounting on the machine frame; the frame surface area
should allow heat to dissipate:
v 100 to 120 V single-phase, 0.18 kW to 0.37 kW (ATV12H018F1, P037F1)
v 200 to 240 V single-phase, 0.18 kW to 0.75 kW (ATV12H018M2, PpppM2)
v 200 to 240 V three-phase, 0.18 kW to 4 kW (ATV12H018M3, PpppM3)
Note: The Altivar 12 drive output voltage is 200 to 240 V three-phase, regardless of the type of
drive line supply.
The Altivar 12 drive utilizes standard Modbus communication protocol, and can be
accessed via the RJ45 connector located on the underside of the drive 4.
The entire range conforms to international standards IEC/EN 61800-5-1 and
IEC/EN 61800-3, is UL, CSA, C-Tick, NOM, GOST certified and has been developed
to meet the requirements of directives regarding the protection of the environment
(RoHS, WEEE) as well as those of European Directives to obtain the e mark.
The integration of a level C1 EMC filter in ATV12ppppM2 drives and the handling of
EMC simplify installation and make it very inexpensive to bring the device into
conformity to obtain the e mark.
This EMC filter can be disconnected via an internal switch 6.
ATV12ppppF1 and ATV12ppppM3 drives are designed without an EMC filter. Filters
are available as an option and can be installed by the customer to reduce
the level of emissions (see page 16).
External accessories and options can be used with Altivar 12 drives:
EMC conformity kits, plates for direct mounting on 35 mm DIN rails, etc.
Braking units combined with a braking resistor, motor chokes, additional EMC input
filters, etc.
The 4-digit display
and modify them via the navigation button 2.
The RUN and STOP buttons
the blanking plate 5 from the door; they must be configured in order to be active.
The Simple Loader tool enables one powered-up drive's configuration to be
duplicated on another powered-up drive.
The Multi-Loader tool enables configurations from a PC or drive to be copied and
duplicated on another drive; the drives do not need to be powered up.
The SoMove setup software can be used with the Altivar 12 drive for configuration,
adjustment, debugging (using the Oscilloscope function) and maintenance, just as it
can for all other Schneider Electric variable speed drives and starters. It can also be
used to customize the integrated display terminal menus. It can be used with a direct
connection or a Bluetooth
The Altivar 12 drive can be connected to a remote display terminal, available as an
option. This terminal can be mounted on an enclosure door with IP 54 or IP 65
degree of protection. The maximum operating temperature is 50°C. It provides
access to the same functions as the Human/Machine Interface.
Dimensions:
page 18
An optimum solution
Electromagnetic compatibility (EMC)
External accessories and options
Dialog and configuration tools
Human/Machine Interface (HMI)
Simple Loader and Multi-Loader configuration tools
SoMove
Remote display terminal
™
setup software
®
12 range of variable speed drives extends across a range of motor
®
1
12
can be used to display states and faults, access parameters
®
wireless connection.
3
Connections:
page 22
can be made accessible on the front panel by removing
Functions:
page 26
9
10
1
2
3
4
5
6
7
8
9