SI-HG80DQD BANNER ENGINEERING, SI-HG80DQD Datasheet - Page 6

• Manufacturer Part Number: SI-HG80DQD
• Description: SWITCH, SAFETY INTERLOCK, 1NO/1NC, 3A
• Manufacturer: BANNER ENGINEERING
• Type: Interlockr

Specifications of SI-HG80DQD

• Contact Configuration: SPDT
• Contact Voltage Ac Max: 250V
• Contact Voltage Dc Max: 60V
• Contact Current Ac Max: 3A
• Contact Current Dc Max: 500mA
• Switch Operation: ON-OFF
• Actuator Type: Flexible
• Current, Rating: 3/0.5 AAC/ADC
• Function: Safety
• Ip Rating: IP67
• Number Of Poles: 1
• Number Of Positions: 2
• Termination: Quick Connect
• Voltage, Rating: 250/60 VAC/VDC

Hinge Switches –

See page 7 for blank hinge dimensions.
Contact Rating
European Rating
Minimum Switching Speed
Mechanical Life
Short Circuit Protection
Force Exerted by Guard
per Switch
Operating Range
Wire Connections
Construction
Environmental Rating
Operating Conditions
Weight
Application Notes
Certifications
80.0 mm
17.0 mm (0.67")
10.0 mm
(3.15")
(0.39")
P/N 46735 rev. B
11.0 mm (0.43")
15.0 mm (0.59")
64.0 mm
(2.52")
4.5 mm
(0.18")
72.0 mm
Model SI-HG80DQD
(2.83")
M12 x 1
3A @ 250V ac max., 0.5 A @ 60V dc max.
2.5 kV max. transient tolerance
NEMA A300 P300
Utilization categories: AC15 and DC13 (IEC 90497-5-1)
U i = 250V ac
I th = 3A
20 operations per minute
1 million operations
6 amp Slow Blow, 10 amp Fast Blow. Recommended external fusing or overload protection.
Axial: 750 N (165 lbf) max.
Radial: 1000 N (220 lbf) max.
0° to 180°
4-pin Micro-style quick-disconnect (QD) fitting. Cables are ordered separately; see page 7.
Zinc Die-cast (GD-Zn)
NEMA 4, IEC IP67
Temperature:
0.40 kg (0.88 lb)
To avoid excessive radial stress in applications containing large doors, the hinge switch should be mounted
either in pairs of two, or in conjunction with a blank hinge (see page 7).
2 x 10.5 mm
SI-HG80 Series
16.0 mm (.63")
10.0 mm (0.39")
(0.41")
15.5 mm
(0.61)
4x 6.5 mm
(0.25")
-25° to +70° C (-13° to +158° F)
19.0 mm
(0.75")
Specifications
Dimensions
R9.0 mm
23.6 mm
(0.93")
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]
Model SI-HG80DQDR
15.5 mm
M12 x 1
Note: 18 mm Hole Recommended
10.0 mm
(0.39")
21.0 mm
(0.83")
19.0 mm
(0.75")
11.5 mm
(0.45")