SI-HG63FQDRR BANNER ENGINEERING, SI-HG63FQDRR Datasheet
SI-HG63FQDRR
Specifications of SI-HG63FQDRR
Related parts for SI-HG63FQDRR
SI-HG63FQDRR Summary of contents
Page 1
... SI-HG63FQDL gn down, switch is mounted on left rd side of hinge Right-Angle QD With switch body SI-HG63FQDRR down, switch is mounted on right side of hinge *NOTE: Terminals 33 and 34 are non-safety. Printed in USA Hinge Wing Safety Interlock Switches SI-HG63 Series Safety Interlock Switches Attached to a Load-Bearing Hinge • Safety switch is integrated into a highly robust PBT housing and screwed onto the fine-cast stainless steel hinge. • ...
Page 2
... ISO 13849-1 (EN954-1). In addition, the user of Banner safety switches has the responsibility to ensure that all local, state, and national laws, rules, codes, and regulations relating to the use of Banner safety switches in any particular application are satisfied. Extreme care is urged that all legal requirements have been met and that all installations and maintenance instructions are followed ...
Page 3
... Ensure that excessive force is not exerted by the weight and swing of the guard, gate, or door. (See specifications on page 6.) Position blank hinges (if used) and the hinge switch(es) on the guard or gate while its fully closed and latched position. Verify that the axis of rotation is identical for all hinges used. ...
Page 4
... If changing the hinge position on the switch (changing from a left hinge to a right, for example), remove the rectangular plug from the switch housing and attach the hinge to that side. Install the hinge onto the switch and rotate 30° ...
Page 5
... Figure 3. Relocating the switch point setting Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164 Hinge Switches – b. SW8 f. SI-HG63 Series P/N 129465 ...
Page 6
... Verification that the hinge swings freely throughout its total operating range. • Loosening of mounting hardware. • Signs of deterioration or damage. • Signs of tampering or defeat to the switch or to the wiring interface to the machine. A designated person is identified in writing by the employer as being appropriately trained to perform a specified checkout procedure. ...
Page 7
... Dimensions for model SI-HG63FQDL are a mirror image. M12X1 Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164 Hinge Switches – Specifications N.O. Contact: ± 9 ° Dimensions Model SI-HG63FQDRR 19.5 mm (0.77") 33.0 mm (1.30" (0.71") 6.3 mm (0.25") 63.0 mm (2.48") 45.0 mm (1.77") 147.0 mm (5.79" ...
Page 8
... MQEAC-606RA 6-Pin 2 m (6.5') MQEAC-61RA Micro-style (15') Right-Angle MQEAC-630RA 9 m (30') Model Description Blank hinge; same mechanical specifications as SI-HG63 Series hinge SI-HG63A switches, but without the safety switch component Model Description Replacement accessory kit includes: SI-HG63-TK1 2 plugs 1 plastic washer 1 bit 1 screwdriver WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. ...