F3SN-A0907P25 Omron, F3SN-A0907P25 Datasheet - Page 11

• Manufacturer Part Number: F3SN-A0907P25
• Description: Safety Light Curtain
• Manufacturer: Omron
• Series: F3SN-Ar

Specifications of F3SN-A0907P25

• Beam Spacing: 15mm
• Control Output Type: PNP
• No. Of Beams: 59
• Protection Height: 907mm
• Sensing Range Max: 10m
• Supply Voltage Max: 24VDC
• Peak Reflow Compatible (260 C): No
• Light Curtain Type: Safety
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

F3SN-B
*1. A safety circuit has been adopted. Please note that the control logic (ON/OFF) may differ from conventionally used logic.
*2. The manual reset mode is set to the “start/restart” interlock. It is impossible to select interlock only or restart interlock only.
*3. No floating blanking or fixed blanking function is provided.
*4. Not provided with the F3SN-B@@@@P70.
*5. The intermediate mounting bracket is supplied with the following types:
*6. Models with different connector configurations are also available as options. Refer to “Many Connector Variations” on page 2.
Item
Sensor type
Applicable safety category
Operating range
Beam gap (P)
Number of beams (n)
Protective height (PH)
(PH = (n – 1) × P + 37)
Detection capability
Effective aperture angle (EAA)
(beam spread angle)
Light source
(emitted wavelength)
Power supply voltage (Vs)
Current
consumption
(no load)
Control outputs (OSSD) *1
Auxiliary output
(non-safety output)
Output operation mode *1
Input voltage
Test functions
Safety functions *2 *3
Protective circuits
Response time (under stable
light incident condition)
Startup waiting time
Ambient operating light
intensity
Ambient temperature
Ambient humidity
Insulation resistance
Dielectric strength
Vibration resistance
(malfunction)
Shock resistance (malfunction) 100 m/s
Degree of protection
Connection method
Weight (packed state)
Materials
Accessories
Use of setting console
Applicable standards
Types which have the total length of the light curtain from 640 mm to 1280 mm: 1 set for each of emitter and receiver.
Types which have the total length of the light curtain over 1280 mm: 2 sets for each of emitter and receiver.
(
http://www.ia.omron.com/
Emitter
Receiver
Different from specifications of F3SN-A)
Model
*6
Type 2 Safety Light Curtain
Category 2, 1, or B
0.2 to 10.0 m
15 mm
13 to 119 (noncontinuous)
217 to 1807 mm
Opaque objects:
25 mm in diameter
Within ±5° for the emitter and receiver at a detection distance of at least 3 m according to IEC 61496-2
Infrared LED (870 nm)
24 VDC ±10% (ripple p-p 10% max.)
Up to 50 beams: 140 mA max., 51 to 85 beams: 155 mA max., 86 beams and more: 170 mA max.
Up to 50 beams: 100 mA max., 51 to 85 beams: 110 mA max., 86 beams and more: 120 mA max.
Two PNP transistor outputs, load current 300 mA max., residual voltage 2 V max.
(except for voltage drop due to cable extension)
One PNP transistor output, load current 50 mA max., residual voltage 2 V max.
(except for voltage drop due to cable extension)
Control output: Light-ON, Auxiliary output: Dark-ON
For test input, interlock selection input, reset input, and external relay monitor input voltages;
ON voltage: 9 to 24 V (sink current: 3 mA max.), OFF voltage: 0 to 1.5 V or open
Output short-circuit protection, reverse polarity protection
ON to OFF: 10 to 15 ms max.
OFF to ON: 40 to 60 ms max.
1 s max.
Incandescent lamp: 3000 Ix max. (light intensity on the receiver surface)
Sunlight: 10000 Ix max. (light intensity on the receiver surface)
Operating: 10 to 55°C, storage: 30 to 70°C (with no icing or condensation)
Operating/storage: 35% to 95% (with no condensation)
20 M min. (at 500 VDC)
1000 VAC 50/60 Hz 1 min.
10 to 55 Hz, 0.7-mm double amplitude, 20 sweeps in X, Y and Z directions
IP65 (IEC60529)
M12 connector (8 pins)
Weight (g) = (Detection width) × 2.4 +
Detection width of 189 to 639 mm:
Detection width of 1,282 to 1,822 mm:
Model with no suffix or 01:
Case: Aluminum, cap: Zinc die-cast, optical cover: PMMA (Acrylic resin)
Test rod *4, instruction manual, mounting brackets (top and bottom),
mounting brackets (intermediate) *5, error mode label
Not permitted
IEC61496-1, EN61496-1 Type 2 ESPE (Electro-Sensitive Protective Equipment)
IEC61496-2 Type 2 AOPD (Active Opto-electronic Protective Devices)
Self test (when power is ON and period is 1 s or less)
External test (light emission stop function by test input)
Auto-reset/manual reset (start/restart interlock)
EDM (External Device Monitor)
2
, 1000 times in X, Y and Z directions
F3SN-B@@@@P25
= 0, Model with suffix 02, 03, or 05:
= 700, Detection width of 652 to 1,267 mm:
+
= 900,
30 mm
7 to 60 (noncontinuous)
217 to 1807 mm
Opaque objects:
40 mm in diameter
F3SN-B@@@@P40
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
= 100, Model with suffix 04:
F3SN-A/F3SN-B/F3SH-A
= 800,
60 mm
5 to 30
277 to 1777 mm
Opaque objects:
70 mm in diameter
F3SN-B@@@@P70
= 200
11