C500OD501CN Omron, C500OD501CN Datasheet - Page 68

• Manufacturer Part Number: C500OD501CN
• Description: TTL OUTPUT
• Manufacturer: Omron

Specifications of C500OD501CN

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• No. Of Digital Outputs: 32
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Power Considerations
AC Connections
3G2A5-PS221-E/223-E
3G2A5-PS222-E
Voltage selector
Short: 100 to 120 VAC
Open: 200 to 240 VAC
Short-circuit these termi-
nals with the shorting
bracket supplied as an
accessory to select 100
to 120 VAC supply volt-
age. For 200 to 240 VAC
leave them open.
Voltage selector
Short: 100 to 120 VAC
Open: 200 to 240 VAC
Short-circuit these terminals
with the shorting bracket
supplied as an accessory to
select 100 to 120 VAC sup-
ply voltage. For 200 to 240
VAC, leave them open.
Screw (4 mm head with
self-raising pressure plate)
Screw (4 mm head with
self-raising pressure plate)
+
-
+
-
!
Caution
Tighten the terminal block screws of the AC
Power Supply to a torque of 1.2 NSm. Loose
screws may result in burning or malfunction.
Isolation transformer
•
and ground can be sig-
nificantly reduced by
connecting a 1-to-1 iso-
lation transformer. Do
not ground the secon-
dary coil of the trans-
former.
Power line
•
pair cable (cross-sec-
tional area: 2 mm
Noise between the PC
Use AWG 14 twisted-
1:1 isolation
transformer
Be sure to use a wire of at least 1.25 mm
thickness. Use ring crimp terminals for wir-
ing. Do not connect bare stranded wires di-
rectly to terminal blocks. Use M4 screws for
tightening crimp terminals.
8.6 mm max.
AC power source
•
or 200 to 240 VAC
•
tuations within the
specified range (refer
to Appendix B Speci-
fications)
Supply 100 to 120
Keep voltage fluc-
2
Breaker
min.)
2
in
Section 6
55