C200H-WCLK21 Omron, C200H-WCLK21 Datasheet - Page 7
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
C200H-WCLK21
Manufacturer Part Number
C200H-WCLK21
Description
MASTER MODULE
Manufacturer
Omron
Datasheet
1.CPM2A-20CDR-A.pdf
(26 pages)
Specifications of C200H-WCLK21
Leaded Process Compatible
No
Peak Reflow Compatible (260 C)
No
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
J I/O ALLOCATION
Input bits
Output bits
Work bits
Special bits (SR area)
Temporary bits (TR area)
Holding bits (HR area)
Auxiliary bits (AR area)
Link bits (LR area)
Timers/Counters
Data memory
Basic in-
terrupts
High-
speed
counter
counter
Pulse output
Synchronized pulse control
Quick-response inputs
Analog controls
Input time constant
Clock function
A--52
e up s
Interrupt
processing
Interval timer
interrupts
High-speed
counter
Interrupt inputs
(counter mode)
Micro Programmable Controller
IR 00000 to IR 00915 (Words not used for input bits can be used for work bits.)
IR 01000 to IR 01915 (Words not used for output bits can be used for work bits.)
928 bits: IR 02000 to IR 04915 (Words IR 020 to IR 049) and IR 20000 to IR 22715 (Words IR 200 to
IR 227)
448 bits: SR 22800 to SR 25515 (Words IR 228 to IR 255)
8 bits (TR0 to TR7)
320 bits: HR 0000 to HR 1915 (Words HR 00 to HR 19)
384 bits: AR 0000 to AR 2315 (Words AR 00 to AR 23)
256 bits: LR 0000 to LR 1515 (Words LR 00 to LR 15)
256 timers/counters (TIM/CNT 000 to TIM/CNT 255)
Read/Write: 2,048 words (DM 0000 to DM 2047)
Error Log is contained in DM 2000 to DM 2021
Read-only: 456 words (DM 6144 to DM 6599)
PC Setup: 56 words (DM 6600 to DM 6655)
External interrupts: 4
(Shared by the external interrupt inputs (counter mode) and the quick-response inputs.)
1 (Scheduled Interrupt Mode or Single Interrupt Mode)
One high-speed counter: 20 kHz single-phase or 5 kHz two-phase (linear count method)
Counter interrupt: 1 (set value comparison or set-value range comparison)
Four inputs (Shared with external interrupt inputs (counter mode) and quick-response inputs.)
Counter interrupts: 4 (Shared by the external interrupt inputs and quick-response inputs.)
Two points with no acceleration/deceleration, 10 to 10 kHz each, and no direction control.
One point with waveform acceleration/deceleration, 10 to 10 kHz, and direction control.
Two points with variable duty-ratio outputs using PWM(----).
(Pulse outputs can be used with transistor outputs only, they cannot be used with relay outputs.)
One point:
A pulse output can be created by combining the high-speed counter with the pulse output and multiply-
ing the frequency of the input pulses from the high-speed counter by a fixed factor.
(This output is possible with transistor outputs only, it cannot be used with relay outputs.)
Four points (Min. input pulse width: 50 µs min.)
2 controls, setting range: 0 to 200
Can be set for all input points.
(1 ms, 2 ms, 3 ms, 5 ms, 10 ms, 20 ms, 40 ms, or 80 ms; default setting: 10 ms)
Shows the year, month, day of the week, day, hour, minute, and second. (Battery backup)
1-ms timers: TMHH(----)
10-ms timers: TIMH(15)
100-ms timers: TIM
1-s/10-s timers: TIML(----)
Decrementing counters: CNT
Reversible counters: CNTR(12)
CPM2A