SNAP-UP1-ADS OPTO 22, SNAP-UP1-ADS Datasheet - Page 3

• Manufacturer Part Number: SNAP-UP1-ADS
• Description: Controllers
• Manufacturer: OPTO 22
• Type: PC Basedr

Specifications of SNAP-UP1-ADS

• Meter Display Type: LED
• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Brand/series: SNAP Series
• Communication: RS-232
• Current, Input: 1.2 A
• Data Rate: Default is 19,200 kBd; Baud Rate is Soft-Selectable From 150 to 115,200 kBd (Serial)
• Dimensions: 3.3"L×1.82"W×4.12"H
• Input Type: Analog/Digital
• Interface: IEEE 802.3 Network, 10Base-T and 100Base-TX (Network)
• Jumper Type: Boot to Kernel⁄Boot to Loader Reset to Factory Defaults
• Memory: 16 MB (Total RAM), 512 KB (Battery-Backed RAM), 8 MB (Flash EEPROM)
• Memory Capacity: 16 MB (Total RAM), 512 KB (Battery-Packed RAM), 8 MB (Flash EEPROM)
• Mounting Type: Rack
• Output Type: Analog/Digital
• Power, Supply: 5.0 VDC ± 0.1 VDC @ 1.2 A (Max.)
• Primary Type: Controller
• Processor Type: 32-bit ColdFire 5407
• Serial Port: RS-232
• Temperature, Operating: 0 to +70 °C
• Voltage, Supply: 5-5.2 VDC
• For Use With: SNAP, Ultimate I/O Ethernet Brain, Analog, Digital Serial
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

SNAP Ultimate Brain
Specifications
NOTE: To compare specifications and features for the SNAP
Ultimate controller/brain with other Opto 22 hardware, see the
following:
•
•
Power Requirements
Processor
Memory:
Backup battery
Network Interface
Serial Port
Serial Data Rates
Maximum Ethernet
Segment Length
Jumpers (Internal)
Temperature:
Humidity
Total RAM
Battery-backed RAM
Flash EEPROM
Operating
Storage
© 2006 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
For I/O processing features, form #1486, the SNAP Ethernet-
Based I/O Processor Comparison Chart
For controller features, form #1485, the SNAP Controller Com-
parison Chart
All Models
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
IEEE 802.3 network, 10Base-T and 100Base-TX
5.0 VDC to 5.2 VDC at 1.2 A maximum (does not include module
power requirements)
32-bit ColdFire 5407
16 MB
512 KB
8 MB
CR2032, fixed (not user replaceable)
RS-232
Default is 19,200 baud; baud rate is soft-selectable from 150 to
115,200 baud.
100 meters with Category 5 or superior UTP.
For 100 Mbps at this distance, use Category 5 or superior solid UTP.
Boot to kernel/boot to loader
Reset to factory defaults
0 °C to 70 °C
-40 °C to 85 °C
0–95% humidity, non-condensing
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
3