SCOTCHFIL 3M, SCOTCHFIL Datasheet - Page 2

• Manufacturer Part Number: SCOTCHFIL
• Description: TAPE, INSULATION, RUBBER, BLK 1.5INX60YD
• Manufacturer: 3M
• Type: Electricalr

Specifications of SCOTCHFIL

• Tape Backing Material: Rubber
• Roll Length: 60"
• Tape Type: Electrical Insulation
• Width: 1-1/2"
• Color: Black
• Dielectric Strength: 575 V⁄mil
• Resistance, Insulation: > 10^6 Megohms
• Standards: UL Recognized
• Thickness: 3 mm
• Description/function: Electrical insulation putty tape
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5. Installation Techniques
To round out irregular connections, mold and pack Scotchfil
Electrical Insulation Putty with moderate finger pressure,
eliminating voids and air spaces. The layers of Scotchfil
will fuse into a homogeneous mass. Over-wrap with two
half lapped layers of Scotch Super 33+ or Super 88 Vinyl
Electrical Tape.
layer of moderately stretched Scotchfil insulation putty
around the cleaned cable jacket at a distance of 3.0 inches
(7,6 cm) from the jacket cutback. Lay the ground wire along
the cable jacket and through the Scotchfil putty. Wrap
several layers of highly elongated Scotchfil putty around the
cable and ground wire. Bind Scotchfil putty tightly with
several wraps of Scotch Super 33+ or Super 88 Vinyl
Electrical Tape. The putty and vinyl tape will make a seal
through which resin cannot flow.
All statements, technical information, and recommendations related
to Seller’s products are based on information believed to be
reliable, but the accuracy or completeness thereof is not
guaranteed. Before utilizing the product, the user should determine
the suitability of the product for its intended use. The user assumes
all risks and liability whatsoever in connection with such use.
Any statements or recommendations of the Seller which are not
contained in the Seller’s current publications shall have no force or
effect unless contained in an agreement signed by an authorized
officer of Seller. The statements contained herein are made in lieu
Important Notice
3
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/245 3573
FAX [phone]
To create a resin dam in resin pressure splices, wrap a
6. Shelf Life
Scotchfil Electrical Insulation Putty has a 5 year shelf-life
(from date of manufacture) when stored under the following
recommended storage conditions. Store behind present
stock in a clean dry place at a temperature of 70ºF and
40-50% relative humidity. Good stock rotation is
recommended.
7. Availability
Scotchfil Electrical Insulation Putty is available in
1 1/2 in x 60 in (3,8 cm x 152,4 cm) rolls from your local
3M authorized electrical distributor.
of all warranties, expressed or implied, including but not limited to
the implied warranties of merchantability and fitness for a particular
purpose which warranties are hereby expressly disclaimed.
SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER
PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT
LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY
INJURY OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES
SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF
THE SELLER’S PRODUCTS THAT WERE DEFECTIVE.
40% Pre-consumer waste paper
10% Post-consumer waste paper
Litho in USA.
© 3M 1997 80-6108-5352-7(0572.5)XX