507-1215 MULTICOMP, 507-1215 Datasheet

SOLDER WIRE, 60/40, 0.5MM, 250G

507-1215

Manufacturer Part Number
507-1215
Description
SOLDER WIRE, 60/40, 0.5MM, 250G
Manufacturer
MULTICOMP
Datasheet
1.507-1215.pdf (4 pages)

Specifications of 507-1215

External Diameter
0.5mm
Material Composition
60/40 (60% Tin, 40% Lead Alloy)
Melting Temperature
180°C
Weight
0.25kg
Bit Temperature
308°C
Flux Type
400, Rosin Based, Halide Free
Wire
RoHS Compliant
Outer Diameter
0.5mm
Solder Alloy
60/40 Sn/Pb
Rohs Compliant
No
Product Range:
Multicomp 400 is designed for users who require a halide free formulation. The remaining products in the range contain higher halide
levels to maximise soldering power.
Multicomp 400, 502, 505 and 511 cored wires are manufactured with a range of flux contents. Although users will normally be using
products with a nominal flux content of 3%, the superior performance of the these products may allow a lower flux content to be
specified e.g 2.2%. This will further improve residue appearance by reducing the quantity.
For applications requiring low residue halide free fluxes, Multicomp 400 is available at 1% flux content (formerly Multicomp X-39).
Multicomp 400, 502, 505 and 511 cored wires are available in a variety of alloys conforming to J-STD-006 and EN 29453 or alloys
conforming to similar national or international standards.
Technical Specification:
Alloys:
The alloys used for Multicomp cored solder wires conform to the purity requirements of the common national and international
standards. A wide range of wire diameters is available manufactured to close dimensional tolerances.
Flux:
Multicomp 400, 502, 505 and 511 solid fluxes are based on modified rosins and carefully selected activators. In use they exhibit a
mild rosin odour and leave a small quantity of clear residue.
Test
Acid value, mg/KOH/g
Halide content, %
J-STD-004
solder spread mm
corrosion test
SIR test (without cleaning)
IPC-SF-818 Class3
Bellcore TR-NWT-000078
Electromigration-test
(without cleaning)
Bellcore TR-NWT-000078
Classification
EN 29454-1
J-STD-004
IPC-SF-818
60/40 Mildly Activated No-Clean Flux
Solder Wire
2
205 - 220
LR3CN
ROLO
Pass
Pass
Pass
Pass
1.1.3
400
210
0
Flux Properties
Page 1
156 - 172
MR3CN
ROM1
Pass
Pass
Pass
Pass
1.1.2
502
310
0.2
Features:
•
•
•
•
•
Halide free version-Multicomp 400.
Fast soldering-range of activities to suit all applications.
Good spread on copper, brass and nickel.
Clear residues.
Heat stable-low spitting.
159 - 177
MR3CN
ROM1
Pass
Pass
Pass
Pass
1.2.2
505
315
0.5
164 - 176
MR3CN
ROM1
29/05/06 V1.0
Pass
Pass
Pass
Pass
1.1.2
511
340
1.1

507-1215 Summary of contents

Page 1

... This will further improve residue appearance by reducing the quantity. For applications requiring low residue halide free fluxes, Multicomp 400 is available at 1% flux content (formerly Multicomp X-39). Multicomp 400, 502, 505 and 511 cored wires are available in a variety of alloys conforming to J-STD-006 and EN 29453 or alloys conforming to similar national or international standards. ...

Page 2

... This process should only take a fraction of a second. • Apply Multicomp flux cored solder wire to a part of the joint surface away from the soldering iron and allow to flow sufficiently to form a sound joint fillet – this should be virtually instantaneous. Do not apply excessive solder or heat to the joint as this may result in dull, gritty fillets and excessive or darkened flux residues. • ...

Page 3

... Solder, 60/40 No-Clean 0.5mm 250g Solder, 60/40 No-Clean 0.7mm 250g Solder, 60/40 No-Clean 0.9mm 250g Solder, 60/40 No-Clean 1.2mm 250g Solder, 60/40 No-Clean 0.7mm 500g Solder, 60/40 No-Clean 0.9mm 500g Solder, 60/40 No-Clean 1.2mm 500g Part Number 507-1215 507-1227 507-1239 507-1240 507-1264 507-1276 507-1288 Page 3 ...

Page 4

... Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2004. ...