FH12A-20S-0.5SH Hirose Electric Co Ltd, FH12A-20S-0.5SH Datasheet - Page 20

• Manufacturer Part Number: FH12A-20S-0.5SH
• Description: CONN FPC/FFC 20POS .5MM HORZ SMD
• Manufacturer: Hirose Electric Co Ltd
• Series: FH12r

Specifications of FH12A-20S-0.5SH

• Connector Type: Top Contacts
• Number Of Positions: 20
• Pitch: 0.020" (0.50mm)
• Ffc, Fcb Thickness: 0.30mm
• Height Above Board: 0.079" (2.00mm)
• Mounting Type: Surface Mount, Right Angle
• Cable End Type: Straight
• Termination: Solder
• Locking Feature: Flip Lock
• Features: Zero Insertion Force (ZIF)
• Contact Finish: Gold
• Operating Temperature: -40°C ~ 85°C
• Current Rating: 0.500A
• Voltage Rating: 50V
• Housing Material: Polyamide (PA), Nylon
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: HFK20TR

20
FH12 Series 0.5mm and 1mm Pitch Connectors For FPC/FFC
Vertical Mounting Type (common for 0.5mm/1mm Pitch)
1. FPC/FFC Termination procedure.
1) Verify that the actuator is positioned upright. If the
2) Insert the FPC/FFC vertically in the connector slot
3) Press down the actuator in the direction shown.
2. FPC/FFC Removal
Connector installed on the board.
actuator has rotated to the side, carefully rotate it
upright.
assuring that the conductive traces of the
FPC/FFC are facing away from the actuator.
Rotate the actuator upward and withdraw the FPC/FFC.
Stiffener
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
Operation
®
Actuator upright
FPC/FFC conductive traces
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: [phone], FAX: [phone]
http://www.hirose.com
http://www.hirose-connectors.com
1) Avoid forcing the actuator up or down without the
2) Do not insert the FPC/FFC diagonally.
Doing so will result in the corners of the FPC/FFC
catching on the contacts and will cause deforma-
tion of the contacts.
FPC/FFC inserted.
Precautions