XF2H-2015-1 Omron, XF2H-2015-1 Datasheet - Page 22
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
XF2H-2015-1
Manufacturer Part Number
XF2H-2015-1
Description
CONN FPC 20POS 0.5MM SMT
Manufacturer
Omron
Series
XF2Hr
Type
FPC Connectorr
Datasheet
1.XF2L-0725-1.pdf
(28 pages)
Specifications of XF2H-2015-1
Connector Type
Top and Bottom Contacts
Number Of Positions
20
Pitch
0.020" (0.50mm)
Ffc, Fcb Thickness
0.30mm
Height Above Board
0.079" (2.00mm)
Mounting Type
Surface Mount, Right Angle
Cable End Type
Straight
Termination
Solder
Locking Feature
Rotary Lock, Backlock
Features
Zero Insertion Force (ZIF)
Contact Finish
Tin Alloy
Contact Finish Thickness
79µin (2.00µm)
Operating Temperature
-30°C ~ 85°C
Current Rating
0.500A
Voltage Rating
50V
Housing Material
Polyamide (PA46), Nylon 4/6
Contact Gender
SKT
Mounting Style
Surface Mount
Number Of Contact Rows
1
Number Of Contacts
20POS
Pitch (mm)
0.5mm
Body Orientation
Right Angle
Contact Resistance Max
30mOhm
Voltage Rating Max
50VDC
Operating Temp Range
-30C to 85C
Current Rating (max)
0.5A
Housing Color
Natural
Contact Material
Copper Alloy
Contact Plating
Tin Alloy on Nickel
Termination Method
Solder
Product Height (mm)
3.44mm
Product Depth (mm)
8.1mm
Product Length (mm)
14.1mm
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
OR644TR
XF2H20151
XF2H20151
22
XF
● All Models
Operating
• Do not lock or unlock the slider with excessive force.
• Do not use the slider again if it becomes detached.
• When inserting and removing the FPC, be sure to check
● Backlocking Models
Operating
• Do not lock the slider without an FPC inserted.
• When locking the slider, apply pressure with your fingertips
• Do not apply force horizontally to the PCB when locking
• When unlocking the slider, place your fingers on either side
Designing
• When designing the board, be sure to allow locking and
Mounting
• Do not perform reflow or manual soldering with the FPC
● Frontlocking Models
Operating
• When unlocking the slider, use your fingernail to rotate and
● Slidelocking Models
Operating
• When locking the slider, apply pressure to both sides or the
Designing
• When designing the board, be sure to allow unlocking and
Doing so may result in damage to the connector or contact
failure.
that the slider has been unlocked first.
Using the FPC in the follow ways may damage the FPC,
change the shape of the contacts, or result in contact fail-
ure.
1. Removing the FPC when the slider is still locked.
2. Removing the FPC by pulling it up and down or from left
Locking the slider without an FPC inserted will cause a
decrease in the dimensions between the contacts and con-
sequently an increase in the force required to insert an
FPC.
to both sides of the slider, then twist the slider until it
comes away from the unit.
Failing to lock the slider properly may result in contact fail-
ure.
the slider. Doing so may result in damage to the connector
or contact failure.
or on the entire slider and slowly lift the slider up and away.
Do not engage the slider past its initial location during the
unlocking process. Doing so may result in damage to the
connector or contact failure.
operating space for the slider.
inserted in the connector and the slider in the locked posi-
tion. Doing so may result in contact failure.
lift the slider. The slider cannot be opened to an angle of
more than 125°C. Do not apply force on the slider beyond
that point. Doing so may result in damage to the connector
or contact failure.
When locking the slider, apply pressure with your fingertips
to the center of the slider, then twist the slider until it comes
away from the unit. Failing to lock the slider properly may
result in contact failure.
entire slider, then push the slider all the way in. Not doing
so may result in contact failure.
operating space for the slider.
to right or twisting it sideways.
XF