FH12-36S-0.5SV(55) Hirose Electric Co Ltd, FH12-36S-0.5SV(55) Datasheet - Page 17
![CONN FPC/FFC 36POS .5MM VERT SMD](/photos/2/91/29173/fh12-36s-0_5sv_55__sml.jpg)
FH12-36S-0.5SV(55)
Manufacturer Part Number
FH12-36S-0.5SV(55)
Description
CONN FPC/FFC 36POS .5MM VERT SMD
Manufacturer
Hirose Electric Co Ltd
Series
FH12r
Datasheet
1.FH12-5S-1SH55.pdf
(20 pages)
Specifications of FH12-36S-0.5SV(55)
Housing Material
Polyamide (PA), Nylon
Voltage Rating
50V
Current Rating
0.500A
Pitch
0.020" (0.50mm)
Connector Type
Vertical Contacts, 1 Sided
Number Of Positions
36
Ffc, Fcb Thickness
0.30mm
Height Above Board
0.142" (3.60mm)
Mounting Type
Surface Mount
Cable End Type
Straight
Termination
Solder
Locking Feature
Flip Lock
Features
Zero Insertion Force (ZIF)
Contact Finish
Gold
Operating Temperature
-40°C ~ 85°C
Product Type
PCB Receptacles
Number Of Positions / Contacts
36
Mounting Angle
Vertical
Mounting Style
SMD/SMT
Contact Material
Phosphor Bronze
Contact Plating
Gold
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
HFL136TR
Connector Operating Instructions, precautions and recommendations
Bottom Contact Type (common for 0.5mm/1mm Pitch)
1. FPC/FFC Termination procedure.
1) Lift up the actuator. Use thumb or index finger.
2) Fully insert the FPC/FFC parallel to mounting sur-
Connector installed on the board.
face, with the exposed conductive traces facing
down.
Operation
FPC/FFC conductive traces
1) Avoid grasping the actuator with two fingers or lift-
2) Do not use a thin tool such as the tip of a screw-
3) Do not apply force in the direction of arrows A, B, or C
4) When inserting the FPC/FFC, do not forcefully rub against
5) Insert the FPC/FFC at the proper position of the connector
driver to release the lock lever. Doing so will cause
deformation of the contacts.
while the lock lever is open.
Doing so will cause the lock lever to become disen gaged,
or will damage the hook portion of the connector body.
insertion slot, and insert perpendicularly with respect to the con-
nector. Improper insertion will cause continuity problems, disen-
gagement of the lock lever, and damage to the hook portion.
ing the actuator with fingernail.
the surface beneath the connector insertion slot.
Doing so will result in the FPC/FFC forcefully striking the
contacts and this will cause contact deformation, peeling
of the FPC/FFC conductors, and other irregularities.
FH12 Series 0.5mm and 1mm Pitch Connectors For FPC/FFC
Precautions
17