NFK2-SC FLUKE NETWORKS, NFK2-SC Datasheet - Page 194

• Manufacturer Part Number: NFK2-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK2-SC

• Lead Free Status / RoHS Status: na

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
Using FindFiber in Loopback Mode
Use FindFiber in Loopback mode to quickly check the
continuity of reference test cords, launch fibers, and fiber
spools. Figure 7-16 shows the equipment needed for using
FindFiber in Loopback mode.
1
7-42
A
B
C
On the Loss/Length tab in Setup, select Loopback
mode.
Tester with OFTM-5612B or OFTM-5732 module. Match
connector adapter to the connectors in the link.
Spare battery pack (optional)
AC adapter with line cord (optional)
Figure 7-16. Equipment for Using FindFiber in Loopback Mode
D
E
F
2
3
4
Duplex reference test cord. Match the fiber to be tested.
One connector must be SC. For the others match the
connectors in the link.
Two adapters of the appropriate type
Fiber cleaning supplies
Clean the tester's OUTPUT connector and the reference
test cord connectors; then connect the tester's OUTPUT
fiber to one end of the fiber path, as shown in Figure
7-17.
Press
Try various connections with the INPUT fiber. The Link
Status shows LOOPBACK for both fibers when the path
is complete.
F
, select FindFiber; then press
T
.
ajt49f.eps