P11100100048703 BARBER - COLMAN, P11100100048703 Datasheet - Page 4

• Manufacturer Part Number: P11100100048703
• Description: Thermocouple
• Manufacturer: BARBER - COLMAN

Specifications of P11100100048703

• Lead Length: 48"
• Thermocouple Type: J
• Terminal Type: Wire Leaded
• Probe Length: 48
• Output Type: Voltage
• Temperature Max: 93°C
• Mounting Type: 1/4" Screw Lug
• Features: Stainless Steel Overbraid
• Lead Free Status / RoHS Status: na

Components (continued)
Process Mounting
Fixed Bayonet
Adjustable Bayonet
Page 2-4
(considered part of the cold end termination). Code designations for each of these
dimensions are as follows:
X = Rigid length (probe). Typically applies to sensor with adjustable attaching device.
Y = Flexible length (flexible armor, SS overbraid, Fiberglass)
Z = Locating depth for fixed bayonet lock. Frequently, but not always, replaces X.
L = Extended lead. In addition to the standard lead length provided on the sensor.
The sensor probe can be mounted to the workpiece with any of the following attaching
devices. All attaching devices are not applicable to all sensors. Each sensor illustration
on the following pages lists only the attaching devices appropriate for that sensor.
A spring loaded locking cap held lin a fixed position on the probe tube between two rings
formed ("popped") on the tube surface. The locking cap attaches to an adapter that is
mounted to the workpiece. Various adapters are illustrated under "Accessories" at the end
of this section.
This device can be fitted over any 1/8" o.d. plain end thermocouple and adjusted to the
selected immersion depth by tightening the compression fitting. With a suitable adapter,
any immersion depth over 1/2" can be selected.
The fitting is shipped with both a nylon and brass ferrule. Nylon permits readjustment, but
should not be exposed to temperature over 250°F. The brass ferrule cannot be adjusted
after it is set. It is suitable for temperatures up to 900°F.
Technical Data
1" for straight probes; 2-3/4" for 45° and 90° probes
(angles bent at final assembly)
Ring Stops formed on tube
Locking Cap
(1-3/8" if "Z" dim.
1-5/8" ±1/16
is 1-1/2")
Spring
Lock Depth ("Z" Dimension)
Brass or Nylon Ferrule
2-5/16"
.272/.220" Diameter
HA136712