STBVP6 BANNER ENGINEERING, STBVP6 Datasheet - Page 6

• Manufacturer Part Number: STBVP6
• Description: Photoelectric Touch Buttons
• Manufacturer: BANNER ENGINEERING

Specifications of STBVP6

• Output Current: 150mA
• Supply Voltage Range Dc: 10V To 30V
• Function: Proximity
• Primary Type: Photoelectric
• Technology: Photoelectric
• Accessories Available: Cordsets, Field Covers and Brackets
• Lead Free Status / Rohs Status: RoHS Exempt Product

6
STB Series Self-Checking Optical Touch Buttons
Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Indicators
Construction
Environmental Rating
Connections
Ambient Light Immunity
Applicable Agency
Standards
Operating Conditions
Application Notes
Two-Hand Control System
Note
Certifications
P/N 64136 rev. B
STBVP6 Models: 10 to 30V dc @ 75 mA, typical
STBVR81 Models: 20 to 30V ac/dc or 20 to 30V ac (peak-to-peak value), (50/60 Hz ±5%) @ 75 mA
Protected against transient voltages and reverse polarity
STBVP6 Models: Complementary PNP (sourcing) open-collector transistors
STBVR81 Models: Complementary electromechanical relays
STBVP6 Models (solid-state outputs):
STBVR81 Models (electromechanical relays):
All models protected against false pulse on power-up. Models with solid-state outputs have overload and
short-circuit protection.
20 milliseconds ON/OFF
2 green LED indicators:
Power: ON – power applied
Output/fault: O N – button is activated
Totally encapsulated, non-metallic enclosure. Black polyetherimide upper housing; fiber-reinforced PBT polyester base.
Electronics fully epoxy-encapsulated. Supplied with polypropylene (TP) field cover.
Meets NEMA standards 1, 3, 4, 4X, 12 and 13; IEC IP66
PVC-jacketed 2 m (6.5') cables or QD fitting, depending on model.
Accessory QD cables required for QD models; see Accessories, page 9.
STBVP6 Models: 4-wire (4-pin Mini-style or Euro-style QD)
STBVR81 Models: 5-wire (5-pin Mini-style or Euro-style QD)
Integral 9 m (30') cables are also available; see model selection chart, page 1.
Up to 100,000 lux
(Used with an AT-FM-10K module or an SC22-3 Safety Controller) Analysis of measures for fault avoidance and fault
control according to SIL3 (IEC 61508 and IEC 62061) and Category 4 (EN ISO 13849-1) passes EMI/RFI test levels
as spedified in IEC61496 and IEC62061.
Temperature: 0 º to +50 º C (+32 º to +122 º F)
Maximum relative humidity: 90% @ +50 º C (non-condensing)
T he polyetherimide upper housing will become brittle with prolonged exposure to outdoor sunlight. Window glass
effectively filters longer wavelength ultraviolet light and provides excellent protection from sunlight. Avoid contact with
strong alkalis, hydrocarbons and fuels. Clean periodically using mild soap solution and a soft cloth.
When the STBVP6 is used with Banner’s SC22-3 Safety Controller in a two-hand control system, the power supply to
the STBVP6 must be of the same voltage that is used to power the Safety Controller and they must have a common
supply ground.
Maximum load: 150 mA
On-state maximum output voltage (no load): +V
Off-state leakage current: < 1 µA
Maximum switching voltage: 125V dc/150V ac
Maximum switching current: 1A @ 24V dc; 0.4A @ 125V ac (resistive loads)
Maximum resistive power: 24W dc/50VA ac
Mechanical life of relays: 10
Electrical life of relays: 1.5 x 10
OFF – button is deactivated
Flashing – internal fault or blocked button on power-up detected
US
Specifications
9
cycles
5
cycles at 1 amp, 24V resistive
(supply)
Banner Engineering Corp. • Minneapolis, MN U.S.A
www.bannerengineering.com • Tel: [phone]
− 1.5V