Q12RB6FF50 BANNER ENGINEERING, Q12RB6FF50 Datasheet - Page 5

• Manufacturer Part Number: Q12RB6FF50
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of Q12RB6FF50

• Output Current: 50mA
• Sensor Output: NPN/PNP DO
• Supply Voltage Range Dc: 10V To 30V
• Sensor Housing: Rectangular
• Wavelength Typ: 640nm
• Response Time: 1.3ms
• Sensing Range Min: 16mm
• Sensor Input: Optical

119223
P/N 119223 rev. G
Ø 3.4 mm (0.13")
0.9 Nm (8 in-lbf)
15.0 mm (0.59")
max. torque*
23.1 mm
(0.91")
Ø12.5 mm (0.49")
8.1 mm (0.32")
5.5 mm (0.22")
22 mm
(0.86")
3.5 mm
(0.14")
8.0 mm
(0.31")
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
0.9 Nm (8 in-lbf)
Ø 3 mm (0.12")
max. torque
22.6 mm
(0.89")
3.2 mm (0.13")
5.9 mm (0.23")
15.0 mm
12.4 mm
(0.49")
(0.59")
3.4 mm
(0.13")
28.8 mm (1.13")
5.1 mm
(0.20")
8.6 mm (0.34")
12.5 mm (0.49")
Chemical-Resistant Models
Polarized Retro
Models
Standard Models
Dimensions
screws included
6.2 mm
(0.25")
Tel: [phone]
M3 mounting
4.7 mm
(0.18")
Mounting hardware
not included
4.7 mm
(0.19")
10.7 mm (0.42")
4.8 mm (0.19") O.D.
PFA Tube
2 m (6.5')
Emitter (all other models)
Emitter (opposed mode models)
* When mounting by running a screw through
both flanges without support between the flanges,
the max. torque applied should be 0.1 Nm (1 in-lbf).
Emitter (opposed mode models)
Emitter (all other models)
5