S18RW3D BANNER ENGINEERING, S18RW3D Datasheet - Page 2

• Manufacturer Part Number: S18RW3D
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of S18RW3D

• Sensing Range: 100mm
• Output Current: 300mA
• Sensing Range Max: 100mm
• Switch Terminals: Cable
• Sensor Input: Optical
• Sensing Mode: Diffuse
• Supply Voltage Range Ac: 20V To 250V

Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
P/N 116160
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: [phone] • www.bannerengineering.com • Email: [e-mail]
20 to 250V ac (50/60 Hz). Average current: 20 mA
Peak current: 200 mA at 20V ac, 500 mA at 120V ac, 750 mA at 250V ac
Protected against transient voltages
SPST solid-state ac switch; Three-wire hookup; Choose light operate or dark
operate models
Light Operate: Output conducts when sensor sees its own (or the emitter’s)
Dark Operate: Output conducts when the sensor sees dark
300 mA maximum (continuous);
Inrush Capability 1 amp for 20 milliseconds, non-repetitive
OFF-state leakage current: < 100 microamps
ON-state saturation voltage: 3V at 300 mA ac; 2V at 15 mA ac
Protected against false pulse on power-up
Opposed Mode: 16 milliseconds ON, 8 milliseconds OFF
Other Models: 16 milliseconds ON and OFF
NOTE: 100 millisecond delay on power-up
Fixed-Field Models: derate 5 mA/°C above +50°C (+122°F)
Right-angle
Micro-style
Micro-style
Straight
Additional information on this product is immediately available online at
4-pin
4-pin
Style
S18 Sensors – ac-Voltage Series
modulated light
For further assistance, contact a Banner Engineering Applications Engineer at [phone] or [phone].
View or download additional information, including excess gain curves, beam patterns and accessories.
MQAC-406
MQAC-415
MQAC-430
MQAC-406RA
MQAC-415RA
MQAC-430RA
Model
2 m (6.5')
2 m (6.5')
5 m (15')
9 m (30')
5 m (15')
9 m (30')
Length
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for
one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its
manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of
Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Quick-Disconnect (QD) Cables
Specifications
Repeatability
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Vibration and Mechanical Shock
Certifications
Opposed Mode: 2 milliseconds
Other Models: 4 milliseconds
Repeatability and response are independent of signal strength.
Two LEDs (Green and Yellow)
Green ON steady: power to sensor is ON
Yellow ON steady: sensor sees light
Yellow flashing: excess gain marginal (1 to 1.5x) in light condition
PBT polyester housing; polycarbonate (opposed mode) or acrylic lens
Leakproof design rated NEMA 6P, DIN 40050 (IP69K)
2 m (6.5') attached cable, or 4-pin Micro-style quick-disconnect fitting
Temperature: -40° to +70°C (-40° to +158°F);
Maximum relative humidity: 90% at 50°C (non-condensing)
All models meet Mil. Std. 202F requirements. Method 201A (Vibration;
frequency 10 to 60 Hz, max., double amplitude 0.06" acceleration 10G).
Method 213B conditions H&I (Shock: 75G with unit operating; 100G for
non-operation)
1/2-20UNF-2B
Dimensions
ø 15 mm
�� �� ����
(0.6")
38 mm max.
������
www.bannerengineering.com/116160
(1.5")
38 mm max.
� ������������
(1.5")
��� ��
������
LISTED
R
Red/White
Red Wire
Wire
Pin-Out
Green Wire
Red/Black
Wire