SM91EANQD BANNER ENGINEERING, SM91EANQD Datasheet - Page 26

• Manufacturer Part Number: SM91EANQD
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of SM91EANQD

• Output Current: 150mA
• Sensor Output: NPN/PNP
• Supply Voltage Range Dc: 10V To 30V
• Peak Reflow Compatible (260 C): No
• Sensor Input: Optical
• Sensing Range Max: 30m
• Leaded Process Compatible: No

Note: 990 Series sensors with internal memory backup (MB) for maintaining “count memory” are available by special order by
adding the suffix “MB” to the model number (eg.- SMA990LVMB).
352
VALU-BEAM
Supply Voltage and Current
Sensor Response Time
Count Entry
Count Reset
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Application Notes
Certifications
Supply Protection Circuitry
®
990 Series Sensors
990 Series sensors wire directly to either 10 to 250V ac (50/60 Hz) or 12 to 115V dc at less than 20 milliamps
Protected against transient voltages
15 milliseconds LIGHT; 15 milliseconds DARK (except model SMA990LT); independent of signal strength
NOTE: 100 millisecond delay on power up (no counts are entered during this time)
Counts are entered on DARK-to-LIGHT transition
In standard models, counter is reset to zero automatically upon applying power to the sensor. All models
may be reset by touching the housing on top of the sensor with permanent magnet (supplied with sensor)
Top-mounted red LED indicator lights whenever the sensor sees “light” condition.
Models SMA91E and SMA91ESR emitters have visible-red “tracer beam” which indicates “power on” and
enables easy “line-of-sight” alignment.
Reinforced thermoplastic polyester housing, totally encapsulated, o-ring sealed lenses or fiber fittings, stainless
steel hardware
Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 12 and 13; IEC IP66
PVC-jacketed 2-conductor 2 m (6.5') or 9 m (30') cables or 3-pin mini-style quick-disconnect (QD) fitting
are available. QD cables are ordered separately. See page 368 and Accessories section.
Temperature:
Maximum relative humidity: 90% at 50°C (non-condensing)
Models with memory backup have no power-up delay. Some models with memory backup may increment
1 count upon reapplication of power
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: [phone]
990 Series Specifications
0° to 50°C (32° to 122°F)