SBR1 BANNER ENGINEERING, SBR1 Datasheet - Page 31

• Manufacturer Part Number: SBR1
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Thru Beamr

Specifications of SBR1

• Turn On Time: 1ms
• Sensor Housing: Rectangular
• Sensor Input: Optical
• Turn Off Time: 1ms
• Sensing Range Max: 150ft
• Sensing Mode: Opposed
• Range: 150-ft With SBE Emitter
• Body Style: Rectangular
• Brand/series: Multi-Beam®
• Function: Module, Proximity
• Primary Type: Photoelectric
• Range, Measurement: 45 m
• Technology: Photoelectric
• Termination: 3, 4-Wire Cable
• Operating Temperature: –40°C to 70°C
• Lead Free Status / Rohs Status: RoHS Exempt Product

Model
bracket assembly which allows adjust-
ment in three directions. It consists of
two 11-gauge zinc plated steel right-
angle brackets which fasten together so
that they rotate relative to each other.
The MULTI-BEAM wiring base at-
taches to the upper bracket and slots are
provided for vertical adjustment. The
bottom bracket is a modified version of
the SMB700. Assembly hardware and a
cable gland are included.
Heavy-duty 1/4-inch (6mm) zinc plated
steel bracket that allows the MULTI-
BEAM to retrofit to installations of
MICRO-SWITCH models MLS8 or
MLS9 sensors. Includes cable gland
and lockwasher.
Model
SMB700. It is sold alone, without the cable gland assembly and
lockwasher.
Model
of the SMB-700. It is sold without hardware.
Mounting Brackets
Model
ing bracket that is supplied with a cable gland assembly which
is used to attach the MULTI-BEAM wiring base to the bracket.
The gland assembly is threaded through the bracket and into the
conduit entrance at the base of the scanner block. A large lock-
washer is supplied to hold the scanner block firmly in place. The
bracket is 11-gauge zinc plated steel.
MULTI-BEAM Accessories
SMB700M
SMB700SS
SMBLS
SMB700
SMB700F
(right) is a two-part
(right) is a general-purpose two-axis mount-
(photo, below) is a flat, single-axis version
is an 11-gauge stainless steel version of the
Heavy duty 1/4-inch (6mm) zinc plated
steel bracket that allows the MULTI-
BEAM to retrofit to installations of
PHOTOSWITCH series 42RLU and
42RLP sensors. Includes cable gland
and lockwasher.
SMB700P
SMBLS
SMB700
Cable gland assembly for MULTI-BEAMs. Includes cord
grips for .1 to .4 inch diameter cable. Bracket lockwasher
is also included.
MBC-4 is a 4-pin male industrial-duty connector that
threads into the base of all MULTI-BEAMs. MBCC-412
is a 12-foot long (3,6m) "SJT" type cable. It is interchange-
able with standard industry types of several different manu-
facturers.
RF1-2NPS
MBC-4
MBCC-412
31