Q60VR3LAF2000Q1 BANNER ENGINEERING, Q60VR3LAF2000Q1 Datasheet - Page 12

• Manufacturer Part Number: Q60VR3LAF2000Q1
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of Q60VR3LAF2000Q1

• Output Current: 5A
• Sensor Output: SPST-NO
• Sensor Housing: Rectangular
• Sensing Range Min: 200mm
• Sensor Input: Laser
• Body Material: ABS/Polycarbonate
• Supply Voltage Max: 250V
• Sensing Range Max: 2000mm
• Sensing Mode: Adjustable-Field
• Sensor Body Material: ABS/Polycarbonate

Q60LAF Series Laser Adjustable-Field Sensors
P/N 114348
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: [phone] • www.bannerengineering.com • Email: [e-mail]
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: [phone] • www.bannerengineering.com • Email: [e-mail]
SMBQ60
58.0 mm
(2.28")
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the
factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner
products. This warranty is in lieu of any other warranty either expressed or implied.
4.0 mm
(0.16")
8.0 mm
(0.31")
8.0 mm
!
(0.31")
10.0 mm
(0.39")
WARNING . . .
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications.
A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
4.2 mm
(0.17")
4.0 mm
(0.16")
• Right-angle bracket
• 14-ga., 304 Stainless Steel
4.0 mm
(0.16")
11.0 mm
(0.43")
64.0 mm
(2.52")
ø3.8 mm
(0.15")
37.8°
32.0 mm
(1.26")
R84.8 mm
(3.34")
Accessory Bracket
ø4.5 mm
(0.18")
3°
2x R2.25 (0.88")
6°
5.0°
R24.1 mm
Not To Be Used for Personnel Protection
(0.95")
20.0 mm
19.0 mm
15.0 mm
(0.59")
(0.75")
(0.79")
10.0°
82.0 mm
1.9 mm
(0.75")
(3.23")