LT3NILVQ BANNER ENGINEERING, LT3NILVQ Datasheet - Page 6

• Manufacturer Part Number: LT3NILVQ
• Description: Proximity Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Analog And Discrete Outputr

Specifications of LT3NILVQ

• Sensor Output: NPN
• Contact Current Max: 20mA
• Switch Terminals: Quick Connect
• Peak Reflow Compatible (260 C): No
• Sensor Housing: Rectangular
• Sensor Input: Laser
• Output Type: Transistor
• Sensing Range Max: 50m
• Leaded Process Compatible: No
• Fiber Optic Sensor Type: Analog And Discrete Output

Push Button Lockout
Enables or disables the keypad to prevent accidental or unauthorized adjustment of the
programming settings.
Power Up/Laser Enable Indicators
When powering up the sensor, the following should occur:
• All LEDs turn ON for 1 second
• Allow 0.6 second delay for Laser Enable at power up. If sensor is already powered
Signal LED
Output LED
window limits.
Power ON/OFF LED
L-GAGE
6
Signal LED
up, see table at right for Laser Enable time. Laser Disable time for all speeds is
50 ms.
Power ON/OFF LED
ON
OFF
Flashing
OFF
Flashing @ 2Hz
Flashing @ 1Hz
ON Solid
P/N 68504 rev. C
Status
Status
(red) – indicates the strength and condition of the sensor’s incoming signal.
(yellow) – lights when a target is sensed within the programmed discrete
• Not available
via push button
Push Button
®
T
(green) – indicates the operating status of the sensor.
LT3 Time-of-Flight Sensor –
Good signal
No signal is received, or the target is beyond the range limitations of
the sensor (with some tolerance beyond the recommended minimum
and maximum sensing distance)
Marginal signal strength (can not teach limits)
Procedure
T
Power is OFF
Discrete output is overloaded (RUN mode)
Power ON, Laser is disabled
Sensor is operating normally (power ON, Laser enabled)
T
T
0.04 sec. ≤ T ≤ 0.8 sec.
• Four-pulse the
T T
remote line
Remote Wire
T T T
Indicators
T T T T
T T T
Indicates
Indicates
• Push buttons are either enabled
or disabled, depending on
previous condition
T
Result
Retro, Analog/Discrete
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
Response Speed
Selected
Medium
Slow
Fast
•
Minneapolis, MN U.S.A.
Enable Time
150 ms
60 ms
51 ms
Laser