D12SN6FP BANNER ENGINEERING, D12SN6FP Datasheet - Page 2

• Manufacturer Part Number: D12SN6FP
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: High Powerr

Specifications of D12SN6FP

• Sensor Output: NPN
• Peak Reflow Compatible (260 C): No
• Sensor Housing: Rectangular
• Sensor Input: Fiber Optic
• Output Type: Transistor
• Leaded Process Compatible: No
• Contact Current Max: 150mA
• Brand/series: D12
• Current, Switching: 150 mA
• Function: Fiber Optic
• Indicator: LED
• Ip Rating: IP66
• Light Source: Visible
• Material, Casing: Black ABS (Housing)
• Material, Cover: Acrylic
• Mounting Type: DIN Rail
• Output: NPN
• Primary Type: Photoelectric
• Sensing Mode: Selectable
• Standards: CE Marked
• Technology: Photoelectric
• Temperature, Operating: -20 to +70 °C
• Termination: Cable
• Time, Response: 500 μs
• Voltage, Supply: 30 VDC
• Accessories Available: Cordsets and Fiber Optic Cable
• Fiber Optic Sensor Type: High Power
• Lead Free Status / Rohs Status: RoHS Exempt Product
• For Use With: Power on and NO output conducting

2
Specifications, D12 Series sensors
Sensing range:
Sensing beam:
Supply voltage:
Protected against reverse polarity and inductive load transients.
Output configurations:
Solid-state dc complementary outputs:
The N.C. (normally closed) output of standard FP and FV models may be
used as an alarm output, depending upon the hookup to the power supply.
Output rating
and the other normally closed (N.C.). 150 mA maximum each output.
No false pulse on power-up. (False pulse protection circuit causes a
0.1 second delay on power-up.) Short-circuit protected.
Off-state leakage current <10 microamps at 30V dc.
On-state saturation voltage <1V at 10 mA dc; <1.5V at 150 mA dc.
The total load may not exceed 150 mA.
Response time (FV, FP models):
500 microseconds "on"; 500 microseconds "off".
Repeatability is 130 microseconds.
FVY, FVY1, FPY, and FPY1 models
standard 500 microsecond response mode plus a high speed (50 microsec-
onds on/off) mode. Repeatability in the high-speed (50 s) mode is 15
microseconds. FPY1 and FVY1 models (when used in the 50 s response
mode) include a 20 ms pulse stretcher for use in applications in which the
load (or input circuit) requires a longer input signal.
Response time and repeatability are independent of signal strength.
Hookup Diagrams, D12 Series Sensor
Sinking (NPN)
Standard Hookup
D12 Series
For glass fiber optics (see page 3 for models)
D12SN6FV Series
D12SN6FVY Series
D12SN6FVY1 Series NPN sinking (high speed, with pulse stretcher)
D12SP6FV Series
D12SP6FVY Series
D12SP6FVY1 Series PNP sourcing (high speed, with pulse stretcher)
For plastic fiber optics (see page 4 for models)
D12SN6FP Series
D12SN6FPY Series
D12SN6FPY1 Series NPN sinking (high speed, with pulse stretcher)
D12SP6FP Series
D12SP6FPY Series
D12SP6FPY1 Series PNP sourcing (high speed, with pulse stretcher)
Sourcing (PNP)
Standard Hookup
: Complementary outputs, one normally open (N.O.)
visible red, 680 nanometers.
see individual excess gain curves, pages 3 and 4.
10 to 30V dc at 45 mA max, exclusive of load.
NPN sinking (standard)
NPN sinking (high speed)
PNP sourcing (standard)
PNP sourcing (high speed)
NPN sinking (standard)
NPN sinking (high speed)
PNP sourcing (standard)
PNP sourcing (high speed)
DIN Rail Fiber Optic Sensors
.
have switch-selectable
NOTE: FPY, FPY1, FVY, and FVY1 models use standard hookup only.
Sinking (NPN)
Alarm Hookup
Sourcing (PNP)
Alarm Hookup
Indicators:
green, and one seven segment red LED moving-dot bargraph. Note
that the seven segment bargraph and marginal excess gain indication
(bargraph segment #7) are inoperative in the 50 s response mode on
Y and Y1 models.
GREEN LED lights for
YELLOW LED lights for
On all models in 500 s response mode, the 7-segment moving dot red
LED bargraph lights to indicate relative received light signal strength.
On all models in 50 and 500 s response modes, segment #1 flashes to
indicate
mode, segment #7 flashes to indicate
standard FV and FP models, a flashing LED corresponds to the "on"
state of the alarm output. (Alarm output not available on Ys & Y1s.)
Adjustments:
module (15-turn slotted brass screw, clutched at both ends of adjust-
ment). FVY and FPY (high speed models) also have a top-mounted
response mode selector switch.
Construction:
cover. Rated NEMA 4; IEC IP66. The fiber clamping element is
Delrin
bracket (supplied).
Cable:
or 6-inch pigtail with pico-type 4-pin QD connector.
Mounting bracket:
DIN rail, or may be through-hole mounted using the supplied mounting
bracket and M3 x 0,5 hardware. Bracket material is black VALOX
Operating temperature range:
Maximum relative humidity 90% at 50 C (non-condensing).
Application caution...
D12 Series sensors are designed to deliver very high optical energy (excess
gain). They should not be used for applications which offer low optical
contrast (i.e. only a small difference in received light levels between the light
and dark sensing conditions). Examples include diffuse mode sensing of
objects in front of a reflective background and opposed mode sensing of non-
opaque materials.
D12 sensors excel in applications requiring high excess gain (e.g. for long-
range sensing, sensing with long fiber lengths, diffuse sensing of materials
with low reflectivity, etc.)
®
. Stainless steel M3 x 0,5 hardware for use with mounting
OUTPUT OVERLOAD
6-1/2-foot (2 m) or 30-foot (9 m) attached PVC-covered cable,
Two top-mounted LED indicators, one yellow and one
All models have a SENSITIVITY control on top of
Black ABS (Cycolac
DC POWER ON
D12 Series sensors mount directly to a standard
NORMALLY OPEN OUTPUT CONDUCTING
. On all models in the 500 s response
MARGINAL EXCESS GAIN
-20 to +70 C (-5 to +158 F).
.
®
KJB) housing with acrylic
. On
®
.
.