MBCC-412 BANNER ENGINEERING, MBCC-412 Datasheet - Page 2

• Manufacturer Part Number: MBCC-412
• Description: QUICK DISCONNECT CABLE, 4POS, STRAIGHT
• Manufacturer: BANNER ENGINEERING
• Type: Straight Femaler

Specifications of MBCC-412

• Cable Length: 12ft
• No. Of Contacts: 4
• Assembly Cable Type: PVC
• Connector Type B: Stripped End Leads
• Brand/series: MBCC
• Cable, Length: 12
• Connector Type: Quick Disconnect
• Indicator: LED
• Length: 4 m
• Output Type: Solid State Relay
• Primary Type: Cable
• Response Time: 4 ms
• Sensor Type: Photoelectric
• Standards: UL Recognized, CSA Certified
• Temperature, Operating: -20 to +70 °C
• Voltage, Rating: 10 to 30 VDC
• Voltage, Supply: 10 to 30 VDC
• Cable Assembly Type: Sensor
• Connector Type A: Straight Circular Plug, 4 Positions, Socket Contacts
• For Use With: Multi-Beam Series Sensors
• Lead Free Status / Rohs Status: RoHS Exempt Product

Banner Engineering Corp. 9714 10th Ave. No., Minneapolis, MN 55441 Telephone: [phone]
Accessories
Model SMB700 is a general-purpose two-axis mounting bracket which is supplied with a cable gland assembly that is used to attach the MULTI-
BEAM wiring base to the bracket. The gland assembly is threaded through the bracket and into the conduit entrance at the base of the scanner block.
A large lockwasher is supplied to hold the scanner block firmly in place. The bracket is 11-gauge zinc-plated steel.
Model SMB700SS is an 11-gauge stainless steel version of the SMB700. It is sold alone, without the cable gland assembly and lockwasher.
Model SMB700F is a flat, single-axis version of the SMB700. It is sold without hardware.
RF1-2NPS
Installation Information
1) Mount the sensors exactly parallel to each other with their lenses directly opposite each other
2) Double check wiring carefully per Hookup Diagram. One sensor must be jumpered for "dark
3) Operation checkout (using alignment indicator LEDs):
NOTE: if necessary, decrease SENSITIVITY (beneath lower cover; see drawing below, rotate
control counterclockwise) to prevent "burn-through" when guiding non-metallic materials
(and/or use model UC-D upper covers).
SMB700
Never use this product as a sensing device for personnel protection. Its
use as a safety device may create an unsafe condition which could lead
to serious injury or death.
Only MACHINE-GUARD and PERIMETER-GUARD Systems, and
other systems so designated, are designed to meet OSHA and ANSI
machine safety standards for point-of-operation guarding devices. No
other Banner sensors or controls are designed to meet these standards, and
they must NOT be used as sensing devices for personnel protection.
(see Deadband Adjustment drawing).
operate", and the other must have the jumper removed for "light operate".
Both beams unblocked = both LEDs "on" and one output "on";
One beam blocked = one LED "off" and no output "on";
Both beams blocked = both LEDs "off" and the other output "on".
!
WARNING
sensing system does NOT include the self-checking
redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or
malfunction can result in either an energized or a de-
energized sensor output condition.
This photoelectric presence
Model RF1-2NPS cable gland assembly (left) for
MULTI-BEAMs includes cord grips for .1- to .4-inch
diameter cable and lockwasher.
Model MBC-4 (right) is a 4-pin male industrial
duty connector that threads into the base of all
MULTI-BEAMs. MBCC-412 is a 12-foot long
(3,6m) mini-type cable. It is interchangeable with
standard industry types of several manufacturers.
*On-off delay, range 1-15 seconds; shorter ranges available
Spare Parts Identification
The modular parts of the Optical Edgeguide System can be
ordered and replaced separately.
on a quote basis. See Banner catalog for more information.
MBC-4
FAX (applications): [phone]
Typical Hookup Diagram
*
MBCC-412