IM-T-11A BANNER ENGINEERING, IM-T-11A Datasheet - Page 2

• Manufacturer Part Number: IM-T-11A
• Description: Interfacing Module
• Manufacturer: BANNER ENGINEERING

Specifications of IM-T-11A

• Supply Voltage Max: 24VDC
• Control Output Type: 2NO/1NC

Certificate of Adequacy
This Safety Module data sheet (p/n 62822) satisfies the requirements of Machinery Directive 2006/42/EC, Section 1.7.4 — instructions.
Two green indicator LEDs on the front of each Interface Module indicate the output status of
internal relays K1 and K2.
Figure 1. Interface Module status indicators
2
ANSI B11 Standards for Machine Tools
Contact: Safety Director, AMT – The Associations for Manufacturing Technology,
ANSI NFPA79 Electrical Standard for Industrial Machinery
Contact: National Fire Protection Association, 1 Batterymarch Park, P.O. Box 9101,
ANSI/RIA R15.06 Safety Requirements for Industrial Robots and Robot Systems
Contact: Robotic Industries Association, 900 Victors Way, P.O. Box 3724, Ann Arbor,
The user is responsible for satisfying all local, state, and national laws, rules, codes, and regulations relating to the use of this product and its application. Banner
Engineering Corp. has made very effort to provide complete application, installation, operation, and maintenance instructions. Please direct any questions regarding the use
or installation of this product to the factory applications department at the telephone numbers or address shown on the back cover.
The user is responsible for making sure that all machine operators, maintenance personnel, electricians, and supervisors are thoroughly familiar with and understand all
instructions regarding the installation, maintenance, and use of this product, and with the machinery it controls. The user and any personnel involved with the installation
and use of this product must be thoroughly familiar with all applicable standards, some of which are listed below. Banner Engineering Corp. makes no claim regarding
a specific recommendation of any organization, the accuracy or effectiveness of any information provided, or the suitability of the provided information for a specific
application.
P/N 62822 rev. C
7901 Westpark Drive, McLean, VA 22102, Tel: [phone]
Quincy, MA 02269-9101, Tel: [phone]
MI 48106, Tel: [phone]
Important ... read this before proceeding!
Machine
13
IM-T-9A
Y4
Safety
S1
Y3
IM-T-9A
Ch.1
Ch.2
23
14
Applicable U.S. Standards
S2
S3
33
24
K1
Y1
S4
Y2
34
K2
K2
K1 Energized
K2 Energized
K2 Energized
K1 Energized
(S1/S2)
(S3/S4)
– Interface Modules
– Interface Modules
Machine
IM-T-11A
Y4
13
Safety
S1
Y3
Ch.1
Ch.2
IM-T-11A
31
14
S2
S3
23
32
ISO 12100-1 (EN292-1) Safety of Machinery – Basic Concepts, General Principles
ISO 12100-2 (EN 292-2) Safety of Machinery – Basic Concepts, General Principles
IEC 60204-1 Electrical Equipment of Machines: Part 1: General Requirements.
ISO 13849-1 (EN954-1) Safety of Machinery – Related Parts of Control Systems:
Contact: Global Engineering Documents, 15 Inverness Way East, Englewood, CO
Y1
S4
for Design, Part 1: Basic Terminology, Methodology
for Design, Part 2: Technical Principles and Specifications
(Also request a type “C” standard for specific machinery.)
Part 1 General Principles for Design
80112-5704, Tel: [phone]
Y2
24
K1
K2
Applicable International Standards
Banner Engineering Corp.
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
www.bannerengineering.com • Tel: [phone]
•
•
Minneapolis, MN U.S.A.
Minneapolis, MN U.S.A.