HEDS-5140#A05 Avago Technologies US Inc., HEDS-5140#A05 Datasheet - Page 7

• Manufacturer Part Number: HEDS-5140#A05
• Description: Code-Wheel Encoder
• Manufacturer: Avago Technologies US Inc.

Specifications of HEDS-5140#A05

• Pulses Per Revolution: 500
• Rotational Speed Max: 30000rpm
• Frequency: 100kHz
• Mounting Type: 3/16" Shaft Mount
• Frequency Max: 100kHz
• Accessory Type: Code Wheel
• Number Of Channels: 3
• Supply Voltage: 5 V
• Operating Temperature Range: - 40 C to + 100 C
• Product: Optical
• Size / Dimension: 3/16 in
• Encoder Resolution: 500CPR
• Rohs Compliant: Yes
• For Use With: Optical Encoder Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Electrical Interface
To insure reliable encoding performance, the HEDS-9040
and 9140 three channel encoder modules require 2.7
kΩ (±10%) pull-up resistors on output pins 2, 3, and 5
(Channels I, A and B) as shown in Figure 1. These pull-up
resistors should be located as close to the encoder mod-
ule as possible (within 4 feet). Each of the three encoder
module outputs can drive a single TTL load in this con-
fi guration.
Figure 2. HEDS-9X40 Mounting Tolerance.
7
Figure 1. Pull-up Resistors on HEDS-9X40 Encoder Module Outputs.
Mounting Considerations
Figure 2 shows a mounting tolerance requirement for
proper operation of the HEDS-9040 and HEDS-9140. The
Aligning Recess Centers must be located within a toler-
ance circle of 0.005 in. radius from the nominal locations.
This tolerance must be maintained whether the module
is mounted with side A as the mounting plane using
aligning pins (see Figure 5), or mounted with Side B as
the mounting plane using an alignment tool (see Figures
3 and 4).