750101 PILZ, 750101 Datasheet - Page 6

• Manufacturer Part Number: 750101
• Description: PNOZ S1 24 VDC
• Manufacturer: PILZ

Specifications of 750101

• Coil Voltage Vdc Nom: 24V
• Contact Current Max: 3A
• Contact Voltage Ac Nom: 240V
• Contact Voltage Dc Nom: 24V
• No. Of Poles: 2
• Relay Mounting: DIN Rail
• External Width: 12.5mm
• External Depth: 120mm
• Svhc: No SVHC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

E-STOP relays, safety gate monitors
Up to PL c of EN ISO 13849-1
PNOZ s1
Installation
Install base unit without contact ex-
pander module:
Connect base unit and PNOZsigma
contact expander module:
Installation in control cabinet
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
Ensure that the plug terminator is
inserted at the side of the unit.
Remove the plug terminator at the
side of the base unit and at the con-
tact expander module.
Connect the base unit and the con-
tact expander module to the sup-
plied connector before mounting
the units to the DIN rail.
The safety relay should be installed
in a control cabinet with a protec-
tion type of at least IP54.
Use the notch on the rear of the unit
to attach it to a DIN rail.
Ensure the unit is mounted securely
on a vertical DIN rail (35 mm) by us-
ing a fixing element (e.g. retaining
bracket or an end angle).
Push the unit upwards or down-
wards before lifting it from the DIN
rail.
Terminal configuration
Dimensions
NSG-D-2-392-2008-11