1.30.245.352/0000 RAFI, 1.30.245.352/0000 Datasheet - Page 3
![SWITCH, KEYLOCK, LATCHING](/photos/19/65/196561/992842105-40_sml.jpg)
1.30.245.352/0000
Manufacturer Part Number
1.30.245.352/0000
Description
SWITCH, KEYLOCK, LATCHING
Manufacturer
RAFI
Series
RAFIX 22 QRr
Datasheet
1.1.30.240.0211000.pdf
(60 pages)
Specifications of 1.30.245.352/0000
Angle Of Throw
90°
Actuation Type
Top
No. Of Switch Positions
2
Actuator Type
Flat
Full Angle
90°
No. Of Positions
2
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
RAFIX 22 QR
Control Components
cast-on collar seal
Contact blocks marked with different
colours for ease of identification in
stock and when connecting.
• NC contacts: red
• NO contacts: green
• NC/NO contacts: red/green
• Lamp socket: black
• Silver contacts:
• Gold contacts:
• The terminals associated with a
The lamps of pushbuttons and signal
lamps can be replaced from the front.
This method saves time and increa-
ses safety since it eliminates the
need for accessing the machine/
control station interior and handling
live cables for lamp replacement.
After unscrewing the front ring, the
lens can be removed and the lamp
replaced.
The components feature a removable
locating lug. If installed without loca-
ting lug, the ring nut with claw can
be used. Accurate alignment of the
actuator can be achieved behind the
front panel. The cast-on collar seal
can not get lost nor be twisted during
installation and allows single-person
assembly: the actuator is held in the
mounting hole by the cast-on seal
and can then be fixed by screwing
from the rear.
First, snap the lamp socket and
contact blocks into the coupling.
Then snap the assembly on to the
actuator. To release it, the bayonet
tent releasing at the same time).
must be pressed (prevents inadver-
basic housing colour is black
basic housing colour is grey
contact pair are colour coded on the
connection side and marked with
the respective contact numbers.
2 - 85
RAFIX
22 QR
2