A16Z-5070 Omron, A16Z-5070 Datasheet - Page 6

• Manufacturer Part Number: A16Z-5070
• Description: Background Label
• Manufacturer: Omron
• Type: Emergency Stop Switchr

Specifications of A16Z-5070

• Accessory Type: Emergency Stop Name Plate
• Label Size: 45mm Dia
• Colour: Yellow Name Plate
• Legend: Blank
• Svhc: No SVHC (15-Dec-2010)
• Color: Yellow
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: A16 Series Switches
• For Use With/related Products: A16 Series Emergency Stop Switches
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: A16Z5070; Z1435

A165E
Installation
After installing the Switch, snap in the Socket Unit from the back of the panel.
1.
Attach rubber packing or the Yellow Plate onto the Switch from its terminal side. Insert the Switch into the panel from the front. Install the lock
ring and mounting nut from the terminal side and tighten.
Adjust the slits on the hole of rubber packing and Yellow Plate to the protruding part of the unit.
Rubber packing is not necessary when the Yellow Plate is used.
Tighten the nut to the torque of 0.49 to 0.78 N S m (5 to 8 kgf S cm).
Case should be installed with its protruding part adjusted to the slit of the panel hole.
Align the lock ring to the groove of the case so that the edge is drawn to the panel side.
2.
Snap on the Socket Unit to the Switch.
Make sure the Switch and the Socket Unit are in the proper orienta-
tion. Align the thin indentations on the case with the white pushbut-
ton markings on the Socket Unit and press the parts together.
6
Mounting the Panel
Installing the Switch
Mounting the Socket Unit
Cutout
Lock
Lock hole
Rubber packing
(attached to the prod-
uct) or yellow plate
(sold separately)
Panel
3.
Grip the part between the Switch holder of the case and the Switch
Unit using the A16Z-5090 Extractor, and pull to remove the Switch
Unit.
4.
When mounting the Lamp, make sure it is facing the direction shown
in the following diagram. Insert the Lamp while matching the pro-
truding part of the Lamp and the small guides on the outer surface of
the case.
Removing the Switch
Installing the LED Lamp
Rubber packing or yellow plate (sold separately)
Protruding part
Panel
Extractor
(A16Z-5080)
Mounting nut
Lock ring
A165E