BZ019A333ZSB AVX Corporation, BZ019A333ZSB Datasheet - Page 18

• Manufacturer Part Number: BZ019A333ZSB
• Description: CAP 33MF 9.0V CARBON SMD
• Manufacturer: AVX Corporation
• Series: BestCap® BZr

Specifications of BZ019A333ZSB

• Capacitance: 33mF
• Tolerance: -20%, +80%
• Voltage - Rated: 9V
• Height: 0.236" (6.00mm)
• Size / Dimension: 1.102" L x 0.669" W (28.00mm x 17.00mm)
• Operating Temperature: -20°C ~ 70°C
• Esr (equivalent Series Resistance): 250.0 mOhm
• Lifetime @ Temp.: 1000 Hrs @ 70°C
• Mounting Type: Surface Mount
• Package / Case: 3 Lead BZ01
• Voltage Rating: 9 Volts
• Esr: 250 mOhms
• Operating Temperature Range: - 20 C to + 70 C
• Dimensions: 17 mm W x 28 mm L x 2.1 mm H
• Leakage Current: 5 uAmps
• Load Life: 1000 Hrs
• Product: Super Capacitors
• Capacitance Tolerance: +80, -20%
• Capacitor Mounting: SMD
• Voltage Rating Vdc: 9V
• No. Of Pins: 3
• Rohs Compliant: Yes
• External Depth: 2.1mm
• External Width: 17mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 478-6269

BestCap
High Power Pulse Supercapacitors
SECTION 3.3: MOUNTING PROCEDURE ON A PCB FOR BESTCAP
BestCap
selectively heating only the capacitor terminals by using a
pulsed reflow soldering station or by using hand soldering.
IR Reflow or wave soldering may not be used. The main
body of the device should be less than 60ºC at all times.
PULSED REFLOW SOLDERING
Application data for the ‘Unitek’ pulsed-reflow soldering
station.
Equipment:
Controller
Head
Solder paste type
Solder composition
Percent solids
Solder thickness
Solder-weld tip size
Solder-weld tip force
Temperature profile:
Pre-heat
Rise
Reflow
Cool
®
products can be mounted on PCBs by either
In both cases, the main body of the BestCap
Temperature
440ºC (±10)
440ºC (±10)
®
Uniflow ‘Pulsed Thermode Control’
Thin-line Reflow Solder Head
No Clean Flux
63% Sn, 37% Pb
88%
6 mils
0.075"
6 lbs.
130ºC
165ºC
Ultra-low ESR
0 sec.
2 sec.
2 sec.
Time
®
part should be less than 60ºC at all times.
HAND SOLDERING STATION
Equipment:
Solder type:
Temperature:
Time:
Solder Type:
Temperature:
Time:
Temperature controlled, 50W general
purpose iron
63Sn/37Pb, rosin core wire
400ºC (+20ºC - 100ºC)
2 to 5 seconds maximum, smaller time
(2 sec.) at 420ºC and 5 sec. at 300ºC,
overall it being a time-temperature rela-
tionship. Shorter time, higher temperature
is preferred.
Lead Free, 95Sn/5Ag
430ºC (+20ºC - 100ºC)
2 to 5 seconds maximum, smaller time
(2 sec.) at 450ºC and 5 sec. at 330ºC,
overall it being a time-temperature rela-
tionship. Shorter time, higher temperature
is preferred.
®
17